Electrical Resolver

Features

Specifications

• Body Material:
  Aluminum
• Body Style:
  Standard round d
• Shoulder Diameter:
  Between 1.9850 inches and 1.9900 inches
• Pilot Diameter:
  Between 0.5900 inches and 0.6000 inches
• Second Shoulder Diameter:
  Between 1.9985 inches and 1.9995 inches
• Second Shoulder Length:
  0.1700 inches
• Flange Diameter:
  Between 2.2490 inches and 2.2500 inches
• Flange Thickness:
  Between 0.2480 inches and 0.2500 inches
• Body Diameter:
  Between 1.9850 inches and 1.9900 inches
• Shaft Diameter:
  0.2402 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.6930 inches single shaft and 0.7190 inches single shaft
• Maximum Tempurature Rise:
  65.0 degrees celsius
• Body Size:
  23
• Rotor Input Voltage Rating In Volts:
  Between 20.0 and 90.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  170.0 milliamperes
• Rotor Input Electrical Power Rating:
  8.0 watts
• Rotor Dc Resistance In Ohms:
  250.00
• Stator Dc Resistance In Ohms:
  280.00
• Transformation Ratio Equality In Percent:
  0.5
• Phase Shift Angle In Deg:
  28.800 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  0.53 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  1.06
• Interaxis Error Angular Range In Minutes:
  -5.0/+5.0
• Output Voltage Functional Error Range In Percent:
  -0.2/+0.2
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.80 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.40 inch-ounces
• Pilot Length:
  0.0460 inches
• Shoulder Length:
  0.2520 inches
• Aft Of First Flange Diameter:
  Between 1.9985 inches and 1.9995 inches
• Mounting Surface To Terminal End Distance:
  Between 3.4300 inches and 3.4450 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3100 inches single shaft
• Shaft Type:
  Round, threaded single shaft
• Transformation Ratio:
  1.000 stator to rotor
• Shaft Thread Size:
  0.250 inches single shaft
• Test Data Document:
  81349-mil-r-14346 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  7 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-145-1187