Electrical Resolver

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  1.3120 inches
• Pilot Diameter:
  0.8750 inches
• Flange Diameter:
  1.4370 inches
• Flange Thickness:
  0.0930 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.5000 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  30.0 degrees celsius
• Body Size:
  15
• Stator Input Voltage Rating In Volts:
  32.0
• Stator Input Current Rating:
  57.0 milliamperes
• Stator Input Electrical Power Rating:
  270.0 milliwatts
• Frequency In Hertz:
  400.0
• Zso Impedance Magnitude In Ohms:
  575.00
• Zso Impedance Angle In Deg:
  81.00
• Rotor Dc Resistance In Ohms:
  57.00
• Stator Dc Resistance In Ohms:
  15.00
• Transformation Ratio Equality In Percent:
  0.2
• Phase Shift Angle In Deg:
  5.700 output to input
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  0.707 input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  0.884
• Interaxis Error Angular Range In Minutes:
  -1.0/+1.0
• Output Voltage Functional Error Range In Percent:
  -0.2/+0.2
• Electrical Error Angular Range In Minutes:
  -2.0/+2.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.60 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Alignment Hole Quantity:
  4
• Shaft Maximum Radial Play:
  0.0004 inches
• Shaft End Play:
  0.0015 inches
• Terminal Designator And Schematic Position:
  Connection r1 position e and connection r2 position f and connection r3 position c and connection s1 position b and connection s2 position c and connection s3 position a
• Pilot Length:
  0.0400 inches
• Shoulder Length:
  0.1320 inches
• Mounting Surface To Terminal End Distance:
  1.9300 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Maximum Runout:
  0.0010 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2000 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.450 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.1000 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  6 solder stud
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-765-1264