Receiver Synchro

Features

Specifications

• Body Material:
  Any acceptable
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.8118 inches and 0.8123 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.9360 inches and 0.9370 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  Between 0.8350 inches and 0.8400 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.0890 inches single shaft and 0.0910 inches single shaft
• Shaft Length:
  0.0300 inches single shaft
• Body Size:
  10
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  120.0 milliamperes
• Rotor Input Electrical Power Rating:
  600.0 milliwatts
• Zro Resistance In Ohms:
  42.00
• Zso Resistance In Ohms:
  9.20
• Zrs Resistance In Ohms:
  49.00
• Rotor Dc Resistance In Ohms:
  Between 18.90 and 23.10
• Stator Dc Resistance In Ohms:
  Between 5.85 and 7.15
• Phase Shift Angle In Deg:
  4.500 input to output
• Actuator Friction Torque At Minus 55 Deg Celsius:
  1.0 centimeter-grams
• Torque Gradient Per Angular Deg:
  2500.0 millimeter-milligrams
• Alignment Hole Quantity:
  3
• Pilot Length:
  0.0380 inches
• Shoulder Length:
  0.0630 inches
• Mounting Surface To Terminal End Distance:
  1.2410 inches
• Shaft Hole Diameter:
  0.0190 inches single shaft and 0.0200 inches single shaft
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  243.00
• Plus J Zso Reactance In Ohms:
  41.00
• Plus J Zrs Reactance In Ohms:
  19.00
• Shaft Type:
  Round, hollowed single shaft
• Alignment Hole Depth:
  0.0730 inches
• Transformation Ratio:
  Between 0.441 rotor to stator and 0.467 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.6750 inches and 0.6810 inches
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-321-8458