Receiver Synchro

Features

Specifications

• Body Material:
  Any acceptable
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 1.3114 inches and 1.3120 inches
• Pilot Diameter:
  Between 0.8745 inches and 0.8750 inches
• Flange Diameter:
  Between 1.4340 inches and 1.4400 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  Between 1.3090 inches and 1.3150 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1870 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.6220 inches single shaft and 0.6420 inches single shaft
• Securing Hole Quantity:
  4
• Body Size:
  15
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  200.0 milliamperes
• Rotor Input Electrical Power Rating:
  3.1 watts
• Zro Impedance Magnitude In Ohms:
  675.50
• Zro Impedance Angle In Deg:
  83.50
• Rotor Dc Resistance In Ohms:
  53.00
• Stator Dc Resistance In Ohms:
  44.00
• Phase Shift Angle In Deg:
  4.600 input to output
• Electrical Error Angular Range In Minutes:
  -3.0/+3.0
• Spline Tooth Quantity:
  21 single shaft
• Receiver Error Angular Range In Minutes:
  -45.0/+45.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.05 inch-ounces
• Torque Gradient Per Angular Deg:
  0.030 inch-ounces
• Pilot Length:
  Between 0.0370 inches and 0.0430 inches
• Shoulder Length:
  Between 0.1290 inches and 0.1350 inches
• Mounting Surface To Terminal End Distance:
  Between 1.7690 inches and 1.7750 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Mounting Facility Screw Thread Series Designator:
  Unc
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2000 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Mounting Facility Screw Thread Diameter:
  0.112 inches
• Transformation Ratio:
  0.767 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.1030 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Terminal Type And Quantity:
  5 tab, solder lug
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-983-7530