Receiver Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0590 inches and 1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  Between 0.9700 inches and 0.9750 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.3120 inches single shaft
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  10.2
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  2.8 milliamperes
• Rotor Input Electrical Power Rating:
  30.0 milliwatts
• Zro Resistance In Ohms:
  37.00
• Zso Resistance In Ohms:
  32.00
• Zrs Resistance In Ohms:
  170.00
• Rotor Dc Resistance In Ohms:
  26.00
• Stator Dc Resistance In Ohms:
  86.00
• Phase Shift Angle In Deg:
  5.000 output to input
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  10.00
• Electrical Error Angular Range In Minutes:
  -10.0/+10.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  5.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.7950 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  140.00
• Shaft Slot Depth:
  0.0310 inches single shaft
• Plus J Zso Reactance In Ohms:
  15.00
• Shaft Slot Width:
  0.0310 inches single shaft
• Plus J Zrs Reactance In Ohms:
  96.00
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.454 stator to rotor
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Terminal Type And Quantity:
  6 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-583-3500