Receiver-transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round d
• Shoulder Diameter:
  1.9900 inches
• Pilot Diameter:
  0.5950 inches
• Second Shoulder Diameter:
  1.9995 inches
• Second Shoulder Length:
  0.1700 inches
• Flange Diameter:
  2.2500 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  1.9900 centimeters
• Shaft Diameter:
  0.2405 inches single shaft
• Shaft Length:
  0.6760 inches single shaft
• Fragility Factor:
  Moderately rugged
• End Application:
  05g0073-001
• Maximum Tempurature Rise:
  35.0 degrees celsius
• Body Size:
  23
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  210.0 milliamperes
• Rotor Input Electrical Power Rating:
  5.6 watts finished-chamfered
• Zss Impedance Magnitude In Ohms:
  127.50
• Zss Impedance Angle In Deg:
  13.50
• Rotor Dc Resistance In Ohms:
  95.00
• Stator Dc Resistance In Ohms:
  106.00
• Phase Shift Angle In Deg:
  11.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  60.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  160.00
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Spline Tooth Quantity:
  22 single shaft
• Receiver Error Angular Range In Minutes:
  -45.0/+45.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Torque Gradient Per Angular Deg:
  0.120 inch-ounces
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0010 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0045 inches
• Pilot Length:
  0.0430 inches
• Shoulder Length:
  0.1070 inches
• Aft Of First Flange Diameter:
  1.9995 inches
• Mounting Surface To Terminal End Distance:
  3.5850 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Maximum Runout:
  0.0008 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3000 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.783 stator to rotor
• Shaft Thread Size:
  0.250 inches single shaft
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Terminal Type And Quantity:
  7 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-114-5095