Receiver-transmitter Synchro

Part Number 808112

Quality inspected with certificate of conformity. For questions and pricing call us at +1 210-468-8090

We ship worldwide

Features

5.9200 inches nominal overall length.

Includes quality control certificate of conformance.

Specifications

  • Body Material:
    Steel, corrosion resisting
  • Body Style:
    Standard round double flange a
  • Shoulder Diameter:
    Between 3.3290 inches and 3.3340 inches
  • Pilot Diameter:
    1.6250 inches
  • Second Shoulder Diameter:
    Between 3.3740 inches and 3.3750 inches
  • Second Shoulder Length:
    0.3750 inches
  • Flange Diameter:
    Between 3.6240 inches and 3.6250 inches
  • Flange Thickness:
    0.2500 inches
  • Body Diameter:
    Between 3.3850 inches and 3.3900 inches
  • Shaft Diameter:
    0.2403 inches single shaft and 0.2405 inches single shaft
  • Shaft Length:
    0.8900 inches single shaft
  • Distance Between Flanges:
    1.3120 inches
  • Maximum Tempurature Rise:
    60.0 degrees celsius
  • Body Size:
    37
  • Rotor Input Voltage Rating In Volts:
    115.0
  • Frequency In Hertz:
    400.0
  • Rotor Input Current Rating:
    1.9 amperes
  • Rotor Input Electrical Power Rating:
    20.0 watts
  • Zss Impedance Magnitude In Ohms:
    Between 3.00 and 4.00
  • Zss Impedance Angle In Deg:
    Between 66.00 and 70.00
  • Phase Shift Angle In Deg:
    1.000 input to output
  • Maximum Fundamental Null Voltage In Millivolts Per Volt:
    35.00 output
  • Maximum Total Null Voltage Output In Millivolts Per Volt:
    170.00
  • Electrical Error Angular Range In Minutes:
    -8.0/+8.0
  • Spline Tooth Quantity:
    22 single shaft
  • Receiver Error Angular Range In Minutes:
    -36.0/+36.0
  • Torque Gradient Per Angular Deg:
    0.900 inch-ounces
  • Pilot Length:
    0.1600 inches
  • Shoulder Length:
    0.6550 inches
  • Aft Of Second Flange Diameter:
    Between 3.3740 inches and 3.3750 inches
  • Mounting Surface To Terminal End Distance:
    4.0300 inches
  • Spline Tooth Diametral Pitch:
    96 single shaft
  • Shaft Thread Series Designator:
    Unf single shaft
  • Shaft Thread Direction:
    Right-hand single shaft
  • Shaft Thread Class:
    2a single shaft
  • Terminal Location:
    Rear
  • Shaft Thread Length:
    0.3870 inches single shaft
  • Shaft Type:
    Spline w/threads single shaft
  • Transformation Ratio:
    0.783 rotor to stator
  • Shaft Thread Size:
    0.250 inches single shaft
  • Test Data Document:
    81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    5 screw
  • Specification Data:
    81349-mil-s-20708/70 government specification
  • Federal Supply Class (fsc):
    Synchros and resolvers
  • National Stock Number (nsn):
    5990-00-085-0829

Price Quote and Buy

Receive a quote by email then order online or over the phone.
5990000850829
Privacy    Terms

Quality Distribution Professional and certified distributor

  • ISO 9001:2015 + AS9120B
  • ITAR Registered
  • Quality inspected NSNs
  • Counterfeit Parts Prevention