Receiver Synchro

Features

Specifications

• Body Material:
  Aluminum alloy
• Body Style:
  Standard round, rear mounting flange
• Shoulder Diameter:
  1.2500 inches
• Pilot Diameter:
  1.0625 inches
• Second Shoulder Diameter:
  1.9000 inches
• Second Shoulder Length:
  0.7000 inches
• Flange Diameter:
  2.2500 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  1.9500 inches
• Shaft Diameter:
  1.8200 inches single shaft
• Shaft Length:
  0.2600 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Shaft Undercut Width:
  0.0200 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  25.0 degrees celsius
• Body Size:
  23
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  133.0 milliamperes
• Rotor Input Electrical Power Rating:
  3.2 watts finished-chamfered
• Zro Resistance In Ohms:
  183.00
• Zso Resistance In Ohms:
  176.00
• Zrs Resistance In Ohms:
  392.00
• Rotor Dc Resistance In Ohms:
  136.00
• Stator Dc Resistance In Ohms:
  204.00
• Phase Shift Angle In Deg:
  10.000 input to output
• Receiver Error Angular Range In Minutes:
  -90.0/+90.0
• Torque Gradient Per Angular Deg:
  0.060 inch-ounces
• Alignment Hole Quantity:
  3
• Shaft End Play:
  0.0150 inches
• Pilot Length:
  0.1250 inches
• Shoulder Length:
  0.0250 inches
• Second Shoulder Face To Rear Flange Distance:
  1.7000 inches
• Shaft Maximum Runout:
  0.0010 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2b single shaft
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  847.00
• Plus J Zso Reactance In Ohms:
  475.00
• Shaft Tapered End Minor Diameter:
  0.8000 inches single shaft
• Plus J Zrs Reactance In Ohms:
  136.00
• Shaft Type:
  Round, tapered, threaded, undercut single shaft
• Alignment Hole Depth:
  0.1560 inches
• Transformation Ratio:
  0.783 stator to rotor
• Shaft Taper Angle In Deg:
  8.0 single shaft
• Shaft Tip Length:
  0.1500 inches single shaft
• Alignment Hole Bolt Circle Diameter:
  0.8440 inches
• Shaft Taper Length:
  0.1100 inches single shaft
• Shaft Thread Size:
  0.112 inches single shaft
• Shaft Undercut Diameter:
  0.0990 inches single shaft
• Terminal Type And Quantity:
  6 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-503-0588