Receiver-transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round double flange a
• Shoulder Diameter:
  Between 3.3290 inches and 3.3340 inches
• Pilot Diameter:
  Between 1.6200 inches and 1.6300 inches
• Second Shoulder Diameter:
  Between 3.3740 inches and 3.3750 inches
• Second Shoulder Length:
  0.3650 mils and 0.3850 centimeters
• Flange Diameter:
  Between 3.6240 inches and 3.6250 inches
• Flange Thickness:
  Between 0.2450 inches and 0.2550 inches
• Body Diameter:
  3.6230 mils and 3.6250 centimeters
• Shaft Diameter:
  0.2403 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.6900 inches single shaft and 0.7100 inches single shaft
• End Application:
  Used as torque receiver transmitter on rudder repeatback on 270 ft coast guard vessels
• Distance Between Flanges:
  Between 1.8070 inches and 1.8170 inches
• Maximum Tempurature Rise:
  35.0 degrees celsius
• Body Size:
  37
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  830.0 milliamperes
• Rotor Input Electrical Power Rating:
  9.3 watts microwatts
• Zss Impedance Magnitude In Ohms:
  Between 8.00 and 10.00
• Zss Impedance Angle In Deg:
  Between 31.00 and 35.00
• Phase Shift Angle In Deg:
  3.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  35.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  200.00
• Electrical Error Angular Range In Minutes:
  -10.0/+10.0
• Spline Tooth Quantity:
  22 single shaft
• Receiver Error Angular Range In Minutes:
  -36.0/+36.0
• Torque Gradient Per Angular Deg:
  0.900 inch-ounces
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0010 inches and 0.0050 inches
• Pilot Length:
  0.0250 mils and 0.0350 centimeters
• Shoulder Length:
  0.6500 mils and 0.6600 centimeters
• Mounting Surface To Terminal End Distance:
  4.0300 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3100 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.783 rotor to stator
• Shaft Thread Size:
  0.250 inches single shaft
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-122-7130