Transmitter Synchro

11-800-00-002

(NSN) National Stock Number

5990-00-754-8135

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

02073

Schedule B Code

9014900000

Summary

Standard round c body style, 0.8118 inches minimum and 0.8123 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6160 inches nominal overall length, 0.9360 inches minimum and 0.9370 inches maximum flange diameter, 0.0630 inches nominal flange thickness

DAC	HCC	DMIL	RNCC
6	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	ZF

Identification

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

INC	FIIG	Concept	Condition
02073	A07800	1	1

Specifications

Body Style

standard round c

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Shoulder Diameter

0.8118 inches minimum and 0.8123 inches maximum

Details

The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.

Pilot Diameter

0.4995 inches minimum and 0.5000 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

1.6160 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

0.9360 inches minimum and 0.9370 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0630 inches nominal

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Diameter

0.8400 inches nominal

Details

None.

Undercut Width

0.0620 inches nominal

Details

None.

Shaft Diameter

0.0895 inches minimum and 0.0900 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.3750 inches nominal single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

Fragility Factor

moderately rugged

Details

The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.

Body Size

Details

An alpha and/or numeric designation indicating the size by which the body is identified.

Rotor Input Voltage Rating In Volts

26.0 nominal

Details

The value of the primary excitation voltage for which the rotor is rated,expressed in volts.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Rotor Input Current Rating

148.0 milliamperes nominal

Details

The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.

Rotor Input Electrical Power Rating

600.0 milliwatts nominal

Details

The value of the primary /electrical/ excitation power for which the rotor is rated.

Zro Resistance In Ohms

27.50 nominal

Details

The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.

Zso Resistance In Ohms

7.70 nominal

Details

The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.

Zrs Resistance In Ohms

47.00 nominal

Details

The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Rotor Dc Resistance In Ohms

16.60 nominal

Details

The opposition that the rotor offers to the flow of the direct current,expressed in ohms.

Stator Dc Resistance In Ohms

7.30 nominal

Details

The opposition that the stator offers to the flow of direct current,expressed in ohms.

Phase Shift Angle In Deg

5.000 input to output nominal

Details

The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.

Maximum Total Null Voltage Output In Millivolts Per Volt

30.00

Details

The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Electrical Error Angular Range In Minutes

-6.0 to 6.0

Details

The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.

Actuator Friction Torque At Minus 55 Deg Celsius

16.0 centimeter-grams maximum

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.

Actuator Friction Torque At Plus 25 Deg Celsius

4.0 centimeter-grams maximum

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.

Alignment Hole Quantity

Details

The number of holes provided for aligning the item.

Pilot Length

0.0380 inches nominal

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Shoulder Length

0.0620 inches nominal

Details

None.

Mounting Surface To Terminal End Distance

1.2410 inches maximum

Details

None.

Body Material

steel corrosion resisting

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Plus J Zro Reactance In Ohms

174.00 nominal

Details

The reactance (x) part of the rotor impedance with the stator open (zro).

Shaft Slot Depth

0.0300 inches nominal single shaft

Details

None.

Plus J Zso Reactance In Ohms

30.50 nominal

Details

The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.

Shaft Slot Width

0.0200 inches nominal single shaft

Details

None.

Plus J Zrs Reactance In Ohms

16.00 nominal

Details

The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Alignment Hole Depth

0.0500 inches maximum

Details

None.

Alignment Hole Bolt Circle Diameter

0.6780 inches nominal

Details

None.

Terminal Type And Quantity

5 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
521003	22525	1	-	5	2	-	TX
8317-3223	23667	5	-	C	1	-	ZZ
10515472	19200	1	-	3	2	-	TX
66-334	56232	1	-	5	2	-	TX
8317-13018	94271	5	-	5	2	-	TX
413265-1	96214	5	-	5	2	-	TX
8317-13018	99932	5	-	C	1	-	ZZ
CGC10AS4	99932	3	-	5	9	-	TX
CGH-10-AS-4	99932	5	-	5	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35080	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

NORTHROP GRUMMAN SYSTEMS CORPORATION DIV AERONAUTICS SYSTEMS

CAGE: 78022

SAN DIEGO , CA , 92127-2412

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5990-00-754-8135

What is the NIIN of the NSN 5990-00-754-8135?

The National Item Identification Number (NIIN) of the NSN 5990-00-754-8135 is 00-754-8135

When the NSN 5990-00-754-8135 was assigned to the Federal Catalog?

It was assigned 62 years ago, on Mon, Jan 1, 1962

Does the NSN 5990-00-754-8135 contain any precious metals?

Type/content is unknown

Does the NSN 5990-00-754-8135 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.