Transmitter Synchro

Part Number 11CX4E

Quality inspected with certificate of conformity. For questions and pricing call us at +1 210-468-8090

We ship worldwide

Features

2.3360 inches minimum and 2.3760 inches maximum overall length.

Includes quality control certificate of conformance.

Specifications

  • Body Material:
    Steel, stainless
  • Body Style:
    Standard round c
  • Shoulder Diameter:
    Between 0.9995 inches and 1.0000 inches
  • Pilot Diameter:
    Between 0.6245 inches and 0.6250 inches
  • Flange Diameter:
    Between 1.0570 inches and 1.0620 inches
  • Flange Thickness:
    0.0930 inches
  • Undercut Diameter:
    0.9750 inches
  • Undercut Width:
    0.0620 inches
  • Shaft Diameter:
    0.1198 inches single shaft and 0.1200 inches single shaft
  • Shaft Length:
    0.5460 inches single shaft and 0.5650 inches single shaft
  • Fragility Factor:
    Moderately rugged
  • Maximum Tempurature Rise:
    20.0 degrees celsius
  • Securing Hole Quantity:
    4
  • Body Size:
    11
  • Rotor Input Voltage Rating In Volts:
    115.0
  • Frequency In Hertz:
    400.0
  • Rotor Input Current Rating:
    31.0 milliamperes
  • Rotor Input Electrical Power Rating:
    490.0 milliwatts
  • Zro Resistance In Ohms:
    Between 3720.00 and 4700.00
  • Zss Resistance In Ohms:
    Between 410.00 and 500.00
  • Zro Impedance Magnitude In Ohms:
    Between 80.00 and 84.00
  • Zss Impedance Magnitude In Ohms:
    Between 17.00 and 26.00
  • Phase Shift Angle In Deg:
    4.500 input to output
  • Maximum Fundamental Null Voltage In Millivolts Per Volt:
    45.00 output
  • Maximum Total Null Voltage Output In Millivolts Per Volt:
    75.00
  • Electrical Error Angular Range In Minutes:
    -7.0/+7.0
  • Actuator Friction Torque At Minus 55 Deg Celsius:
    0.07 inch-ounces
  • Actuator Friction Torque At Plus 25 Deg Celsius:
    0.07 inch-ounces
  • Pilot Length:
    Between 0.0450 inches and 0.0650 inches
  • Shoulder Length:
    Between 0.0590 inches and 0.0790 inches
  • Mounting Surface To Terminal End Distance:
    Between 1.7910 inches and 1.8110 inches
  • Mounting Facility Screw Thread Series Designator:
    Unc
  • Terminal Location:
    Rear
  • Shaft Slot Depth:
    0.0250 inches single shaft
  • Shaft Slot Width:
    0.0200 inches single shaft
  • Shaft Type:
    Round, slotted single shaft
  • Alignment Hole Depth:
    0.1250 inches
  • Mounting Facility Screw Thread Diameter:
    0.112 inches
  • Transformation Ratio:
    0.783 rotor to stator
  • Alignment Hole Bolt Circle Diameter:
    0.6250 inches
  • Test Data Document:
    81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    5 screw
  • Federal Supply Class (fsc):
    Synchros and resolvers
  • National Stock Number (nsn):
    5990-00-206-3753

Price Quote and Buy

Receive a quote by email then order online or over the phone.
5990002063753
Privacy    Terms

Quality Distribution Professional and certified distributor

  • ISO 9001:2015 + AS9120B
  • ITAR Registered
  • Quality inspected NSNs
  • Counterfeit Parts Prevention