Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round b
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  1.0670 inches
• Flange Thickness:
  Between 0.0880 inches and 0.0980 inches
• Undercut Width:
  Between 0.0450 inches and 0.0550 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.4380 inches single shaft and 0.4420 inches single shaft
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  280.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.11 watts finished-chamfered
• Zro Impedance Magnitude In Ohms:
  18.10
• Zro Impedance Angle In Deg:
  79.50
• Zso Impedance Magnitude In Ohms:
  107.00
• Zso Impedance Angle In Deg:
  81.70
• Rotor Dc Resistance In Ohms:
  9.00
• Stator Dc Resistance In Ohms:
  3.00
• Phase Shift Angle In Deg:
  8.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  26.00
• Electrical Error Angular Range In Minutes:
  -5.0/+5.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  4.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  16.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  Between 0.0005 inches and 0.0030 inches
• Pilot Length:
  0.0570 mils and 0.0670 centimeters
• Shoulder Length:
  0.0570 mils and 0.0670 centimeters
• Mounting Surface To Terminal End Distance:
  1.7820 inches
• Shaft Maximum Runout:
  0.0008 inches
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0250 inches single shaft and 0.0370 inches single shaft
• Shaft Slot Width:
  0.0200 inches single shaft and 0.0370 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  Between 0.1200 inches and 0.1300 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Test Data Document:
  06481-900141-69 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-813-5085