Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.8118 inches and 0.8123 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 0.9360 inches and 0.9370 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  Between 0.8350 inches and 0.8400 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.0880 inches single shaft and 0.0900 inches single shaft
• Shaft Length:
  0.4120 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Fragility Factor:
  Moderately rugged
• Body Size:
  10
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  105.0 milliamperes
• Rotor Input Electrical Power Rating:
  990.0 allqjaa3.500 finished-chamfered
• Zro Resistance In Ohms:
  48.00
• Zso Resistance In Ohms:
  9.90
• Zrs Resistance In Ohms:
  70.50
• Rotor Dc Resistance In Ohms:
  33.00
• Stator Dc Resistance In Ohms:
  9.60
• Phase Shift Angle In Deg:
  8.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -10.0/+10.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  9.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3.0 centimeter-grams
• Torque Gradient Per Angular Deg:
  2300.0 millimeter-milligrams
• Alignment Hole Quantity:
  3
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  Between 0.0002 inches and 0.0012 inches
• Pilot Length:
  0.0380 inches
• Shoulder Length:
  0.0630 inches
• Mounting Surface To Terminal End Distance:
  1.2410 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  235.00
• Shaft Slot Depth:
  0.0300 inches single shaft
• Plus J Zso Reactance In Ohms:
  41.60
• Shaft Slot Width:
  0.0200 inches single shaft
• Plus J Zrs Reactance In Ohms:
  26.00
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.0780 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.6780 inches
• Shaft Radial Play Determining Weight:
  0.75 ounces
• Shaft End Play Determining Weight:
  3.0 ounces
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-722-7918