Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0590 inches and 1.0620 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.4270 inches single shaft and 0.4470 inches single shaft
• Shaft Undercut Width:
  0.0200 inches single shaft
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  280.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.0 watts
• Zro Resistance In Ohms:
  16.20
• Zso Resistance In Ohms:
  3.60
• Zrs Resistance In Ohms:
  22.50
• Zss Resistance In Ohms:
  3.90
• Rotor Dc Resistance In Ohms:
  9.10
• Stator Dc Resistance In Ohms:
  3.00
• Phase Shift Angle In Deg:
  4.400 input to output
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.5 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.3 centimeter-grams
• Torque Gradient Per Angular Deg:
  5760.0 millimeter-milligrams
• Alignment Hole Quantity:
  4
• Pilot Length:
  Between 0.0590 inches and 0.0650 inches
• Shoulder Length:
  Between 0.0590 inches and 0.0650 inches
• Mounting Surface To Terminal End Distance:
  Between 1.8810 inches and 1.8850 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  105.00
• Shaft Slot Depth:
  0.0160 inches single shaft and 0.0310 inches single shaft
• Plus J Zso Reactance In Ohms:
  17.60
• Shaft Slot Width:
  0.0270 inches single shaft and 0.0290 inches single shaft
• Plus J Zrs Reactance In Ohms:
  7.28
• Shaft Type:
  Round, slotted, undercut single shaft
• Plus J Zss Reactance In Ohms:
  1.00
• Transformation Ratio:
  0.454 rotor to stator
• Shaft Tip Length:
  0.0750 inches single shaft
• Alignment Hole Bolt Circle Diameter:
  0.8150 inches
• Shaft Undercut Diameter:
  0.0960 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-326-2172