Transmitter Synchro

Features

Specifications

• Body Material:
  Any acceptable
• Body Style:
  Standard round d
• Shoulder Diameter:
  1.9900 inches
• Pilot Diameter:
  0.5950 inches
• Second Shoulder Diameter:
  1.9995 inches
• Second Shoulder Length:
  0.1700 inches
• Flange Diameter:
  2.2500 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  1.9900 inches
• Shaft Diameter:
  0.2405 inches single shaft
• Shaft Length:
  0.6760 inches single shaft
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  22
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  82.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.6 watts
• Zro Impedance Magnitude In Ohms:
  Between 1450.00 and 1700.00
• Zro Impedance Angle In Deg:
  Between 79.00 and 83.00
• Zss Impedance Magnitude In Ohms:
  Between 155.00 and 310.00
• Zss Impedance Angle In Deg:
  Between 10.00 and 15.00
• Phase Shift Angle In Deg:
  6.500 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  30.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  60.00
• Electrical Error Angular Range In Minutes:
  -6.0/+6.0
• Spline Tooth Quantity:
  22 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.20 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0530 inches
• Shoulder Length:
  0.2500 inches
• Aft Of First Flange Diameter:
  1.9995 inches
• Mounting Surface To Terminal End Distance:
  3.6230 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2910 inches single shaft
• Plus J Zro Reactance In Ohms:
  Between 1419.00 and 1690.00
• Plus J Zrs Reactance In Ohms:
  Between 1419.00 and 1690.00
• Shaft Type:
  Spline w/threads single shaft
• Plus J Zss Reactance In Ohms:
  Between 26.90 and 80.15
• Transformation Ratio:
  0.783 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  1.4370 inches
• Shaft Thread Size:
  0.250 inches single shaft
• Terminal Type And Quantity:
  5 screw
• Nondefinitive Specification/std Data:
  23cx6c type
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-677-6495