Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  0.6250 inches
• Flange Diameter:
  1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9800 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.2830 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Fragility Factor:
  Moderately rugged
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  280.0 milliamperes
• Rotor Input Electrical Power Rating:
  950.0 allqjaa3.500 finished-chamfered
• Zro Impedance Magnitude In Ohms:
  107.00
• Zro Impedance Angle In Deg:
  81.70
• Zso Impedance Magnitude In Ohms:
  18.10
• Zso Impedance Angle In Deg:
  79.50
• Zrs Impedance Magnitude In Ohms:
  23.00
• Zrs Impedance Angle In Deg:
  23.90
• Rotor Dc Resistance In Ohms:
  9.00
• Stator Dc Resistance In Ohms:
  3.00
• Phase Shift Angle In Deg:
  7.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  15.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  20.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  0.0015 inches
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.9550 inches
• Shaft Maximum Runout:
  0.0010 inches
• Terminal Location:
  Side
• Shaft Slot Depth:
  0.0300 inches single shaft
• Shaft Slot Width:
  0.0300 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.0700 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Shaft Radial Play Determining Weight:
  4.0 ounces
• Shaft End Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-682-9933