Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6225 inches and 0.6230 inches
• Flange Diameter:
  1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9850 inches
• Undercut Width:
  0.0450 inches
• Shaft Diameter:
  0.1200 inches single shaft
• Shaft Length:
  0.5380 inches single shaft
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  280.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.11 watts
• Zro Resistance In Ohms:
  16.00
• Zso Resistance In Ohms:
  3.70
• Rotor Dc Resistance In Ohms:
  9.00
• Stator Dc Resistance In Ohms:
  3.00
• Phase Shift Angle In Deg:
  8.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  17.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  26.00
• Electrical Error Angular Range In Minutes:
  -5.0/+5.0
• Electrical Error Angular Range In Minutes:
  -5.0 to 5.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  Between 0.0600 inches and 0.6400 inches
• Mounting Surface To Terminal End Distance:
  1.7750 inches
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  107.00
• Shaft Slot Depth:
  0.0300 inches single shaft
• Plus J Zso Reactance In Ohms:
  18.00
• Shaft Slot Width:
  0.0300 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-190-3374