Transmitter Synchro

Part Number 904971

Quality inspected with certificate of conformity. For questions and pricing call us at +1 210-468-8090

We ship worldwide

Features

2.3320 inches maximum overall length.

Includes quality control certificate of conformance.

Specifications

  • Body Material:
    Steel, corrosion resisting
  • Body Style:
    Standard round b
  • Shoulder Diameter:
    Between 1.3115 inches and 1.3120 inches
  • Pilot Diameter:
    Between 0.8745 inches and 0.8750 inches
  • Flange Diameter:
    Between 1.4320 inches and 1.4370 inches
  • Flange Thickness:
    Between 0.0880 inches and 0.0980 inches
  • Undercut Width:
    Between 0.0730 inches and 0.0830 inches
  • Shaft Diameter:
    0.1867 inches single shaft and 0.1872 inches single shaft
  • Shaft Length:
    0.4900 inches single shaft and 0.5100 inches single shaft
  • Maximum Tempurature Rise:
    20.0 degrees celsius
  • Body Size:
    15
  • Rotor Input Voltage Rating In Volts:
    115.0
  • Frequency In Hertz:
    400.0
  • Rotor Input Current Rating:
    85.0 milliamperes
  • Rotor Input Electrical Power Rating:
    1.2 watts
  • Zro Impedance Magnitude In Ohms:
    Between 1402.00 and 1643.00
  • Zro Impedance Angle In Deg:
    Between 81.40 and 84.60
  • Zss Impedance Magnitude In Ohms:
    Between 123.00 and 138.00
  • Zss Impedance Angle In Deg:
    Between 26.50 and 31.50
  • Phase Shift Angle In Deg:
    4.000 input to output
  • Maximum Fundamental Null Voltage In Millivolts Per Volt:
    32.00 output
  • Maximum Total Null Voltage Output In Millivolts Per Volt:
    60.00
  • Electrical Error Angular Range In Minutes:
    -6.0/+6.0
  • Actuator Friction Torque At Plus 25 Deg Celsius:
    0.05 inch-ounces
  • Alignment Hole Quantity:
    4
  • Shaft Radial Play Test Point:
    0.125 inches
  • Shaft Maximum Radial Play:
    0.0006 inches
  • Shaft End Play:
    0.0010 inches
  • Pilot Length:
    Between 0.0350 inches and 0.0450 inches
  • Shoulder Length:
    Between 0.1270 inches and 0.1370 inches
  • Mounting Surface To Terminal End Distance:
    1.7770 inches
  • Shaft Maximum Runout:
    0.0008 inches
  • Terminal Location:
    Rear
  • Shaft Slot Depth:
    0.0250 inches single shaft
  • Shaft Slot Width:
    0.0200 inches single shaft
  • Shaft Type:
    Round, slotted single shaft
  • Alignment Hole Depth:
    0.1250 inches
  • Transformation Ratio:
    0.783 rotor to stator
  • Alignment Hole Bolt Circle Diameter:
    Between 1.0970 inches and 1.1030 inches
  • Shaft Radial Play Determining Weight:
    8.0 ounces
  • Shaft End Play Determining Weight:
    16.0 ounces
  • Test Data Document:
    81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    6 screw
  • Specification Data:
    81349-mil-s-20708/14 government specification
  • Federal Supply Class (fsc):
    Synchros and resolvers
  • National Stock Number (nsn):
    5990-01-305-7228

Price Quote and Buy

Receive a quote by email then order online or over the phone.
5990013057228
Privacy    Terms

Quality Distribution Professional and certified distributor

  • ISO 9001:2015 + AS9120B
  • ITAR Registered
  • Quality inspected NSNs
  • Counterfeit Parts Prevention