Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0570 inches and 1.0620 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1198 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.5460 inches single shaft and 0.5650 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Securing Hole Quantity:
  4
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  31.0 milliamperes
• Rotor Input Electrical Power Rating:
  490.0 milliwatts
• Zro Resistance In Ohms:
  Between 3720.00 and 4700.00
• Zss Resistance In Ohms:
  Between 410.00 and 500.00
• Zro Impedance Magnitude In Ohms:
  Between 80.00 and 84.00
• Zss Impedance Magnitude In Ohms:
  Between 17.00 and 26.00
• Phase Shift Angle In Deg:
  4.500 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  45.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  75.00
• Electrical Error Angular Range In Minutes:
  -7.0/+7.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.07 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.07 inch-ounces
• Pilot Length:
  Between 0.0450 inches and 0.0650 inches
• Shoulder Length:
  Between 0.0590 inches and 0.0790 inches
• Mounting Surface To Terminal End Distance:
  Between 1.7910 inches and 1.8110 inches
• Mounting Facility Screw Thread Series Designator:
  Unc
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0250 inches single shaft
• Shaft Slot Width:
  0.0200 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.1250 inches
• Mounting Facility Screw Thread Diameter:
  0.112 inches
• Transformation Ratio:
  0.783 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.6250 inches
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-206-3753