Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0590 inches and 1.0620 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0500 inches
• Shaft Diameter:
  0.0800 inches single shaft and 0.0810 inches single shaft
• Shaft Length:
  0.3600 inches single shaft and 0.3900 inches single shaft
• Shaft Undercut Width:
  0.0300 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  120.0 milliamperes
• Rotor Input Electrical Power Rating:
  600.0 milliwatts
• Zro Resistance In Ohms:
  44.00
• Zso Resistance In Ohms:
  57.00
• Rotor Dc Resistance In Ohms:
  18.00
• Stator Dc Resistance In Ohms:
  9.30
• Phase Shift Angle In Deg:
  4.000 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  25.00
• Electrical Error Angular Range In Minutes:
  -15.0/+15.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  1.8 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.6 centimeter-grams
• Torque Gradient Per Angular Deg:
  2000.0 millimeter-milligrams
• Alignment Hole Quantity:
  4
• Pilot Length:
  Between 0.0590 inches and 0.0650 inches
• Shoulder Length:
  Between 0.0590 inches and 0.0650 inches
• Mounting Surface To Terminal End Distance:
  1.6200 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  3a single shaft
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  243.00
• Plus J Zso Reactance In Ohms:
  28.00
• Shaft Tapered End Minor Diameter:
  0.0780 inches single shaft
• Shaft Type:
  Round, tapered, threaded, undercut single shaft
• Alignment Hole Depth:
  0.0900 inches
• Transformation Ratio:
  0.454 rotor to stator
• Shaft Taper Angle In Deg:
  3.0 single shaft
• Shaft Tip Length:
  0.0650 inches single shaft
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Taper Length:
  0.1370 inches single shaft
• Shaft Thread Size:
  0.060 inches single shaft
• Shaft Undercut Diameter:
  0.0440 inches single shaft and 0.0460 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-010-1413