Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round d
• Shoulder Diameter:
  Between 1.9850 inches and 1.9900 inches
• Pilot Diameter:
  Between 0.5900 inches and 0.6000 inches
• Second Shoulder Diameter:
  Between 1.9985 inches and 1.9995 inches
• Second Shoulder Length:
  Between 0.1670 inches and 0.1700 inches
• Flange Diameter:
  Between 2.2490 inches and 2.2500 inches
• Flange Thickness:
  Between 0.2490 inches and 0.2500 inches
• Body Diameter:
  Between 1.9900 inches and 1.9950 inches
• Shaft Diameter:
  0.2402 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.6930 inches single shaft and 0.7190 inches single shaft
• Maximum Tempurature Rise:
  65.0 degrees celsius
• Body Size:
  23
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  210.0 milliamperes
• Rotor Input Electrical Power Rating:
  5.0 watts
• Zro Resistance In Ohms:
  132.00
• Zso Resistance In Ohms:
  98.00
• Zrs Resistance In Ohms:
  249.00
• Zso-9 Designator Resistance In Ohms:
  90.00
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  75.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  125.00
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Spline Tooth Quantity:
  22 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.50 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Torque Gradient Per Angular Deg:
  0.130 inch-ounces
• Pilot Length:
  Between 0.0360 inches and 0.0460 inches
• Shoulder Length:
  Between 0.2410 inches and 0.2520 inches
• Aft Of First Flange Diameter:
  Between 1.9985 inches and 1.9995 inches
• Mounting Surface To Terminal End Distance:
  3.4450 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2660 inches single shaft
• Plus J Zro Reactance In Ohms:
  494.00
• Plus J Zso Reactance In Ohms:
  311.00
• Plus J Zrs Reactance In Ohms:
  79.00
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.783 rotor to stator
• Plus J Zso-9 Designator Reactance In Ohms:
  90.00
• Shaft Thread Size:
  0.250 inches single shaft
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  7 screw
• Specification Data:
  81349-mil-s-20708/94 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-553-6711