Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, stainless
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.4995 inches and 0.5000 inches
• Flange Diameter:
  Between 1.0600 inches and 1.0630 inches
• Flange Thickness:
  0.0620 inches
• Undercut Diameter:
  0.9620 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1195 inches single shaft and 0.1200 inches single shaft
• Shaft Length:
  0.4680 inches single shaft
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  205.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.6 watts
• Zro Resistance In Ohms:
  40.00
• Zso Resistance In Ohms:
  4.80
• Rotor Dc Resistance In Ohms:
  Between 14.90 and 18.10
• Stator Dc Resistance In Ohms:
  Between 4.30 and 5.10
• Phase Shift Angle In Deg:
  6.500 input to output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  30.00
• Electrical Error Angular Range In Minutes:
  -25.0/+25.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  10000.00 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  3000.00 centimeter-grams
• Alignment Hole Quantity:
  3
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.6870 inches
• Shaft Hole Diameter:
  0.0730 inches single shaft
• Terminal Location:
  Rear
• Plus J Zro Reactance In Ohms:
  120.00
• Plus J Zso Reactance In Ohms:
  25.00
• Shaft Tapered End Minor Diameter:
  0.1002 inches single shaft
• Shaft Type:
  Round single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.454 rotor to stator
• Shaft Taper Angle In Deg:
  3.0 single shaft
• Alignment Hole Bolt Circle Diameter:
  0.6950 inches
• Shaft Taper Length:
  0.1480 inches single shaft
• Terminal Type And Quantity:
  5 wire lead
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-678-6006
• Special Features:
  Shaft end tap no. 1-72 nf-3b, 0.1720 in. Nom deep