Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0500 inches and 1.0510 inches
• Flange Thickness:
  Between 0.0900 inches and 0.0960 inches
• Undercut Diameter:
  Between 0.9290 inches and 0.9410 inches
• Undercut Width:
  Between 0.0970 inches and 0.1030 inches
• Shaft Diameter:
  0.1870 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.5450 inches single shaft and 0.5650 inches single shaft
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  300.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.1 watts
• Zro Resistance In Ohms:
  16.00
• Zso Resistance In Ohms:
  3.70
• Zrs Resistance In Ohms:
  22.00
• Zss Resistance In Ohms:
  4.10
• Phase Shift Angle In Deg:
  4.000 input to output
• Spline Tooth Quantity:
  21 single shaft
• Torque Gradient Per Angular Deg:
  0.008 inch-ounces
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0008 inches
• Shaft End Play:
  0.0010 inches
• Pilot Length:
  Between 0.0590 inches and 0.0650 inches
• Shoulder Length:
  Between 0.0590 inches and 0.0650 inches
• Mounting Surface To Terminal End Distance:
  2.2500 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2700 inches single shaft
• Plus J Zro Reactance In Ohms:
  107.00
• Plus J Zso Reactance In Ohms:
  18.10
• Plus J Zrs Reactance In Ohms:
  8.90
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Plus J Zss Reactance In Ohms:
  1.40
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 0.8090 inches and 0.8150 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Terminal Type And Quantity:
  1 connector, plug
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-160-5967