Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round d
• Shoulder Diameter:
  2.7000 inches
• Pilot Diameter:
  0.3120 inches
• Second Shoulder Diameter:
  2.7500 inches
• Second Shoulder Length:
  0.3750 inches
• Flange Diameter:
  3.1000 inches
• Flange Thickness:
  0.2500 inches
• Body Diameter:
  2.7000 inches
• Shaft Diameter:
  0.2500 inches single shaft
• Shaft Length:
  0.8100 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  60.0 degrees celsius
• Body Size:
  31
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  1.76 amperes
• Rotor Input Electrical Power Rating:
  17.0 watts
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  75.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  100.00
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.50 inch-ounces
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.20 inch-ounces
• Torque Gradient Per Angular Deg:
  0.670 inch-ounces
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0005 inches
• Shaft End Play:
  0.0040 inches
• Pilot Length:
  0.0300 inches
• Shoulder Length:
  0.6150 inches
• Aft Of First Flange Diameter:
  2.7500 inches
• Mounting Surface To Terminal End Distance:
  4.4300 inches
• Shaft Maximum Runout:
  0.0005 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3000 inches single shaft
• Shaft Type:
  Round, threaded single shaft
• Transformation Ratio:
  0.783 stator to rotor
• Shaft Thread Size:
  0.250 inches single shaft
• Shaft Radial Play Determining Weight:
  16.0 ounces
• Shaft End Play Determining Weight:
  48.0 ounces
• Test Data Document:
  81349-mil-s-16892 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  5 screw
• Specification Data:
  81349-mil-s-16892-31tx4a government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-503-0386