Transmitter Synchro

Features

Specifications

• Body Material:
  Aluminum alloy
• Body Style:
  Standard round c
• Shoulder Diameter:
  2.7000 inches
• Pilot Diameter:
  0.2405 inches
• Flange Diameter:
  3.1000 inches
• Flange Thickness:
  0.2500 inches
• Undercut Diameter:
  2.7500 inches
• Undercut Width:
  0.0250 inches
• Shaft Diameter:
  0.2405 inches single shaft
• Shaft Length:
  0.7300 inches single shaft
• Fragility Factor:
  Moderately rugged
• Maximum Tempurature Rise:
  10.0 degrees celsius
• Body Size:
  31
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  191.0 milliamperes
• Rotor Input Electrical Power Rating:
  2.26 watts
• Zro Resistance In Ohms:
  693.00
• Zss Resistance In Ohms:
  63.00
• Zro Impedance Angle In Deg:
  83.20
• Zss Impedance Angle In Deg:
  20.00
• Rotor Dc Resistance In Ohms:
  53.60
• Stator Dc Resistance In Ohms:
  52.00
• Phase Shift Angle In Deg:
  4.400 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  30.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  100.00
• Electrical Error Angular Range In Minutes:
  -8.0/+8.0
• Spline Tooth Quantity:
  22 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  0.50 inch-ounces
• Pilot Length:
  0.3750 inches
• Shoulder Length:
  0.1850 inches
• Mounting Surface To Terminal End Distance:
  3.3800 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3130 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.783 rotor to stator
• Shaft Thread Size:
  0.390 inches single shaft
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  5 screw
• Specification Data:
  81349-mil-s-20708/139 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-030-5206