Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  Between 1.3115 inches and 1.3120 inches
• Pilot Diameter:
  Between 0.8745 inches and 0.8750 inches
• Flange Diameter:
  Between 1.4320 inches and 1.4370 inches
• Flange Thickness:
  Between 0.0880 inches and 0.0980 inches
• Undercut Width:
  Between 0.0730 inches and 0.0830 inches
• Shaft Diameter:
  0.1867 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.4900 inches single shaft and 0.5100 inches single shaft
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  15
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  85.0 milliamperes
• Rotor Input Electrical Power Rating:
  1.2 watts
• Zro Impedance Magnitude In Ohms:
  Between 1402.00 and 1643.00
• Zro Impedance Angle In Deg:
  Between 81.40 and 84.60
• Zss Impedance Magnitude In Ohms:
  Between 123.00 and 138.00
• Zss Impedance Angle In Deg:
  Between 26.50 and 31.50
• Phase Shift Angle In Deg:
  4.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  32.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  60.00
• Electrical Error Angular Range In Minutes:
  -6.0/+6.0
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.05 inch-ounces
• Alignment Hole Quantity:
  4
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0006 inches
• Shaft End Play:
  0.0010 inches
• Pilot Length:
  Between 0.0350 inches and 0.0450 inches
• Shoulder Length:
  Between 0.1270 inches and 0.1370 inches
• Mounting Surface To Terminal End Distance:
  1.7770 inches
• Shaft Maximum Runout:
  0.0008 inches
• Terminal Location:
  Rear
• Shaft Slot Depth:
  0.0250 inches single shaft
• Shaft Slot Width:
  0.0200 inches single shaft
• Shaft Type:
  Round, slotted single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.783 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  Between 1.0970 inches and 1.1030 inches
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Test Data Document:
  81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  6 screw
• Specification Data:
  81349-mil-s-20708/14 government specification
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-01-305-7228