-
Body Material:
Steel, corrosion resisting
-
Body Style:
Standard round b
-
Shoulder Diameter:
1.0000 inches
-
Pilot Diameter:
0.6250 inches
-
Flange Diameter:
1.0620 inches
-
Flange Thickness:
0.0930 inches
-
Undercut Width:
0.0620 inches
-
Shaft Diameter:
0.1200 inches single shaft
-
Shaft Length:
0.5620 inches single shaft
-
Maximum Tempurature Rise:
20.0 degrees celsius
-
Body Size:
11
-
Rotor Input Voltage Rating In Volts:
26.0
-
Frequency In Hertz:
400.0
-
Rotor Input Current Rating:
130.0 milliamperes
-
Rotor Input Electrical Power Rating:
340.0 milliwatts
-
Zro Impedance Magnitude In Ohms:
Between 200.00 and 300.00
-
Zro Impedance Angle In Deg:
Between 80.50 and 84.00
-
Zss Impedance Magnitude In Ohms:
Between 6.00 and 12.00
-
Zss Impedance Angle In Deg:
Between 18.00 and 30.00
-
Phase Shift Angle In Deg:
4.000 input to output
-
Maximum Fundamental Null Voltage In Millivolts Per Volt:
12.00 output
-
Maximum Total Null Voltage Output In Millivolts Per Volt:
19.00
-
Electrical Error Angular Range In Minutes:
-7.0/+7.0
-
Spline Tooth Quantity:
21 single shaft
-
Actuator Friction Torque At Plus 25 Deg Celsius:
0.07 inch-ounces
-
Shaft Maximum Radial Play:
0.0006 inches
-
Shaft End Play:
0.0100 inches
-
Pilot Length:
0.0620 inches
-
Shoulder Length:
0.0620 inches
-
Mounting Surface To Terminal End Distance:
1.7940 inches
-
Spline Tooth Diametral Pitch:
120 single shaft
-
Shaft Thread Series Designator:
Unf single shaft
-
Shaft Thread Direction:
Right-hand single shaft
-
Shaft Thread Class:
2a single shaft
-
Terminal Location:
Rear
-
Shaft Thread Length:
0.2530 inches single shaft
-
Shaft Type:
Spline w/threads single shaft
-
Transformation Ratio:
0.454 rotor to stator
-
Shaft Thread Size:
0.190 inches single shaft
-
Shaft Radial Play Determining Weight:
8.0 ounces
-
Shaft End Play Determining Weight:
1.0 ounces
-
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
-
Terminal Type And Quantity:
5 screw
-
Specification Data:
81349-mil-s-20708/8 government specification
-
Federal Supply Class (fsc):
Synchros and resolvers
-
National Stock Number (nsn):
5990-01-189-3201