Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  1.3120 inches
• Pilot Diameter:
  0.8750 inches
• Flange Diameter:
  1.4370 inches
• Flange Thickness:
  0.0930 inches
• Undercut Width:
  0.0780 inches
• Shaft Diameter:
  0.1872 inches single shaft
• Shaft Length:
  0.5000 inches single shaft
• Schematic Diagram Designator:
  1 y-rotor, 1 stator
• Fragility Factor:
  Moderately rugged
• End Application:
  Ld616647
• Maximum Tempurature Rise:
  20.0 degrees celsius
• Body Size:
  15
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  60.0
• Rotor Input Current Rating:
  22.0 milliamperes
• Rotor Input Electrical Power Rating:
  360.0 milliwatts
• Zro Impedance Magnitude In Ohms:
  Between 5335.00 and 6265.00
• Zro Impedance Angle In Deg:
  Between 80.00 and 83.00
• Zss Impedance Magnitude In Ohms:
  Between 675.00 and 825.00
• Zss Impedance Angle In Deg:
  Between 11.00 and 16.00
• Phase Shift Angle In Deg:
  7.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  45.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  90.00
• Electrical Error Angular Range In Minutes:
  -6.0/+6.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Plus 25 Deg Celsius:
  0.05 inch-ounces
• Alignment Hole Quantity:
  4
• Shaft Radial Play Test Point:
  0.125 inches
• Shaft Maximum Radial Play:
  0.0006 inches
• Shaft End Play:
  0.0010 inches
• Pilot Length:
  0.0400 inches
• Shoulder Length:
  0.1320 inches
• Mounting Surface To Terminal End Distance:
  3.5280 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Maximum Runout:
  0.0004 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2100 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.1250 inches
• Transformation Ratio:
  0.783 stator to rotor
• Alignment Hole Bolt Circle Diameter:
  1.1000 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Shaft Radial Play Determining Weight:
  8.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-491-8613