Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round b
• Shoulder Diameter:
  Between 2.6840 inches and 2.6900 inches
• Pilot Diameter:
  Between 1.4995 inches and 1.5000 inches
• Flange Diameter:
  Between 2.9350 inches and 2.9380 inches
• Shaft Diameter:
  0.2403 inches single shaft and 0.2405 inches single shaft
• Shaft Length:
  0.7300 inches single shaft
• Body Size:
  30
• Rotor Input Voltage Rating In Volts:
  115.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  1650.0 milliamperes
• Rotor Input Electrical Power Rating:
  12.0 watts
• Phase Shift Angle In Deg:
  2.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  50.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  125.00
• Electrical Error Angular Range In Minutes:
  -10.0/+10.0
• Spline Tooth Quantity:
  22 single shaft
• Torque Gradient Per Angular Deg:
  0.600 inch-ounces
• Shaft Radial Play Test Point:
  0.605 inches
• Shaft Maximum Radial Play:
  0.0006 inches
• Shaft End Play:
  Between 0.0020 inches and 0.0060 inches
• Shoulder Length:
  Between 0.2240 inches and 0.2300 inches
• Mounting Surface To Terminal End Distance:
  5.8780 inches
• Spline Tooth Diametral Pitch:
  96 single shaft
• Shaft Maximum Runout:
  0.0008 inches
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.3400 inches single shaft
• Shaft Type:
  Spline w/threads single shaft
• Transformation Ratio:
  0.783 rotor to stator
• Shaft Thread Size:
  0.239 inches single shaft
• Shaft Radial Play Determining Weight:
  16.0 ounces
• Shaft End Play Determining Weight:
  16.0 ounces
• Test Data Document:
  81349-mils20708-59 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
• Terminal Type And Quantity:
  6 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-722-7333