Transmitter Synchro

Features

Specifications

• Body Material:
  Steel, corrosion resisting
• Body Style:
  Standard round c
• Shoulder Diameter:
  Between 0.9995 inches and 1.0000 inches
• Pilot Diameter:
  Between 0.6245 inches and 0.6250 inches
• Flange Diameter:
  Between 1.0590 inches and 1.0650 inches
• Flange Thickness:
  0.0930 inches
• Undercut Diameter:
  0.9750 inches
• Undercut Width:
  0.0620 inches
• Shaft Diameter:
  0.1867 inches single shaft and 0.1872 inches single shaft
• Shaft Length:
  0.6170 inches single shaft
• Fragility Factor:
  Moderately rugged
• Body Size:
  11
• Rotor Input Voltage Rating In Volts:
  26.0
• Frequency In Hertz:
  400.0
• Rotor Input Current Rating:
  280.0 milliamperes
• Rotor Input Electrical Power Rating:
  950.0 milliwatts
• Zro Resistance In Ohms:
  15.50
• Zso Resistance In Ohms:
  3.30
• Zrs Resistance In Ohms:
  21.00
• Rotor Dc Resistance In Ohms:
  9.00
• Stator Dc Resistance In Ohms:
  3.00
• Phase Shift Angle In Deg:
  5.000 input to output
• Maximum Fundamental Null Voltage In Millivolts Per Volt:
  17.00 output
• Maximum Total Null Voltage Output In Millivolts Per Volt:
  26.00
• Electrical Error Angular Range In Minutes:
  -10.0/+10.0
• Spline Tooth Quantity:
  21 single shaft
• Actuator Friction Torque At Minus 55 Deg Celsius:
  16.0 centimeter-grams
• Actuator Friction Torque At Plus 25 Deg Celsius:
  4.0 centimeter-grams
• Alignment Hole Quantity:
  4
• Pilot Length:
  0.0620 inches
• Shoulder Length:
  0.0620 inches
• Mounting Surface To Terminal End Distance:
  1.7960 inches
• Spline Tooth Diametral Pitch:
  120 single shaft
• Shaft Thread Series Designator:
  Unf single shaft
• Shaft Thread Direction:
  Right-hand single shaft
• Shaft Thread Class:
  2a single shaft
• Terminal Location:
  Rear
• Shaft Thread Length:
  0.2460 inches single shaft
• Plus J Zro Reactance In Ohms:
  106.00
• Plus J Zso Reactance In Ohms:
  17.80
• Plus J Zrs Reactance In Ohms:
  9.30
• Shaft Type:
  Spline w/threads single shaft
• Alignment Hole Depth:
  0.0620 inches
• Transformation Ratio:
  0.454 rotor to stator
• Alignment Hole Bolt Circle Diameter:
  0.8120 inches
• Shaft Thread Size:
  0.190 inches single shaft
• Terminal Type And Quantity:
  5 screw
• Federal Supply Class (fsc):
  Synchros and resolvers
• National Stock Number (nsn):
  5990-00-652-5449