Variable Attenuator
69526-1
(NSN) National Stock Number
5985-00-007-7210
Federal Supply Classification
5985 Antennas, Waveguides and Related Equipment
Item Name Code
00838
Schedule B Code
8529109000
Summary
Audio application design, "t" schematic diagram designator, 1.500 inches nominal distance between mounting facility centers, +0.0 to 60.0 deg celsius operating temp range, 600.0 milliwatts average power rating, unc mounting facility screw thread series designator
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00838 | A223A0 | - | 1 |
Specifications
Application Design
audio
Details
The primary application for which the item is designed.Schematic Diagram Designator
"t"
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Distance Between Mounting Facility Centers
1.500 inches nominal
Details
The distance between mounting facility centers.Operating Temp Range
+0.0 to 60.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Power Rating
600.0 milliwatts average
Details
The amount of electrical energy that can be dissipated.Mounting Facility Screw Thread Series Designator
unc
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Overall Attenuation Range In Decibels
+0.0 to 80.0
Details
The overall limits of decrease of the amplitude ratio of a signal between the input and output of the item,expressed in decibels.Attenuation Variation Method
stepped
Details
The means by which the attenuation can be varied from the minimum to the maximum setting.Step Position Quantity
18
Details
The number of intervals at which the item can be set.Attenuation Per Step In Decibels
10.0
Details
The amount of attenuation between adjacent steps,expressed in decibels.Mounting Facility Type And Quantity
2 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Overall Attenuation Accuracy In Decibels
-0.50 to 0.50
Details
The overall limits of permissible variation in the attenuation accuracy from the nominal value at a specified frequency rating or range,expressed in decibels.Mounting Thread Quantity
32 per inch
Details
The number of mounting threads on the item measured on a line parallel to the thread axis,including incomplete threads.Adjustment Device Type And Quantity
2 shaft
Details
Indicates the type and number of facilities for adjusting the item.Mounting Facility Pattern
two position in-line
Details
The general configuration and relative position of the facilities provided for mounting the item.Shaft Type
round
Details
Indicates the type of shaft included on the item.Mounting Facility Nominal Screw Thread Diameter
0.164 inches
Details
The nominal length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.Impedance Rating In Ohms
1000.0 input-output
Details
The total opposition (resistive and reactive) to the flow of alternating current,expressed in ohms.Test Data Document
69526-82340 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Terminal Type And Quantity
6 tab, solder lug
Details
Indicates the type and number of terminals for providing electrical connection.Fsc Application Data
antennas,waveguides,and related equipment
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 11531 | 28057 | 5 | - | 5 | 2 | - | TX |
| 11531 | 58880 | 6 | - | C | 1 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
L3HARRIS TECHNOLOGIES, INC. DIV SPACE AND AIRBORNE SYSTEMS
CAGE: 82340
AMITYVILLE
, NY
, 11701-1130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5985-00-007-7210
What is the NIIN of the NSN 5985-00-007-7210?
The National Item Identification Number (NIIN) of the NSN 5985-00-007-7210 is 00-007-7210
When the NSN 5985-00-007-7210 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jul 12, 1972
Does the NSN 5985-00-007-7210 contain any precious metals?
Does not contain precious metal
Does the NSN 5985-00-007-7210 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products