Variable Attenuator
1285-009-8664
(NSN) National Stock Number
5985-00-009-8664
Federal Supply Classification
5985 Antennas, Waveguides and Related Equipment
Item Name Code
00838
Schedule B Code
8529109000
Summary
Waveguide application design, waveguide type body style, 2.240 inches minimum and 2.260 inches maximum overall length, 1.280 inches nominal center to center distance between mounting facilities parallel to length, 1.220 inches nominal center to center distance between mounting facilities parallel to width, 2.272 inches nominal overall height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 9 | - | - | 6 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | YP |
Identification
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00838 | A223A0 | - | 1 |
Specifications
Application Design
waveguide
Details
The primary application for which the item is designed.Body Style
waveguide type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Overall Length
2.240 inches minimum and 2.260 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Center To Center Distance Between Mounting Facilities Parallel To Length
1.280 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Center To Center Distance Between Mounting Facilities Parallel To Width
1.220 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.Overall Height
2.272 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.609 inches minimum and 1.641 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Unthreaded Mounting Hole Diameter
0.169 inches minimum and 0.179 inches maximum
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Operating Temp Range
-40.0 to 175.0 deg fahrenheit
Details
The minimum and maximum limits of temperature at which the item is rated for operation.End Item Identification
radar set,an/vps-2
Details
The national stock number or the identification information of the end equipment for which the item is a part.Power Rating
500.0 milliwatts average
Details
The amount of electrical energy that can be dissipated.Waveguide Flange Type
choke
Details
Indicates the type of waveguide flange.Waveguide Flange Designation
ug-136b/u
Details
The alphabetical characters and numerals which identify the specific waveguide flange type.Insertion Loss At Minimum Attenuation In Maximum Decibels
0.3
Details
The mathematical relationship of power available at the load before and after addition of the item to the circuit,set to its lowest value of attenuation,expressed in maximum decibels.Attenuation Variation Method
continuous
Details
The means by which the attenuation can be varied from the minimum to the maximum setting.Mounting Facility Type And Quantity
4 terminal w/mounting holes
Details
Indicates the type and number of facilities by which the item is mounted.Frequency Range
9.270 gigahertz minimum and 9.270 gigahertz maximum
Details
The minimum and maximum cyclic changes,per unit of time,for which an item is rated.Body Material
aluminum
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Adjustment Device Type And Quantity
1 slotted screw
Details
Indicates the type and number of facilities for adjusting the item.Mounting Facility Pattern
four position rectangular
Details
The general configuration and relative position of the facilities provided for mounting the item.Terminal Type And Quantity
2 flange
Details
Indicates the type and number of terminals for providing electrical connection.Fsc Application Data
antennas,waveguides,and related equipment
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 10548153 | 62874 | 5 | - | 5 | 2 | - | TX |
| 155-A29 | 00929 | 6 | - | 5 | 2 | - | TX |
| 10548153 | 19200 | A | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 723 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
CAGE: A00AM
NOUACEUR
, 27000
MOROCCO
View Products
FAQs
Frequently asked questions for NSN 5985-00-009-8664
What is the NIIN of the NSN 5985-00-009-8664?
The National Item Identification Number (NIIN) of the NSN 5985-00-009-8664 is 00-009-8664
When the NSN 5985-00-009-8664 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Fri, Mar 9, 1973
Does the NSN 5985-00-009-8664 contain any precious metals?
Does not contain precious metal
Does the NSN 5985-00-009-8664 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products