Variable Attenuator
228076-2
Transmission line application design, coaxial type body style, 3.200 inches nominal overall length, 2.120 inches nominal overall height, 1.310 inches nominal overall width, 0.250 inches nominal shaft diameter
DAC | HCC | DMIL | RNCC |
---|---|---|---|
A | - | - | 5 |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
2 | - | - | TX |
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
INC | FIIG | Concept | Condition |
---|---|---|---|
00838 | A223A0 | - | 1 |
Details
The primary application for which the item is designed.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The distance measured in a straight line from the bottom to the top of an item.Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Details
A measurement of the longest dimension of the shaft,in distinction from width.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The national stock number or the identification information of the end equipment for which the item is a part.Details
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.Details
A letter or group of letters used to designate the particular coaxial connector series.Details
The amount of electrical energy that can be dissipated.Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Details
The mathematical relationship of power available at the load before and after addition of the item to the circuit,set to its lowest value of attenuation,expressed in maximum decibels.Details
The overall limits of decrease of the amplitude ratio of a signal between the input and output of the item,expressed in decibels.Details
The means by which the attenuation can be varied from the minimum to the maximum setting.Details
Indicates the type and number of facilities by which the item is mounted.Details
The minimum and maximum cyclic changes,per unit of time,for which an item is rated.Details
The number of mounting threads on the item measured on a line parallel to the thread axis,including incomplete threads.Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Details
Indicates the type and number of facilities for adjusting the item.Details
The general configuration and relative position of the facilities provided for mounting the item.Details
Indicates the type of shaft included on the item.Details
The nominal length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.Details
The total opposition (resistive and reactive) to the flow of alternating current,expressed in ohms.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
Indicates the type and number of terminals for providing electrical connection.Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
8122S-100 | 04423 | 5 | - | 3 | 2 | - | TX |
2887497-1 | 53711 | 6 | - | C | 1 | - | ZZ |
1802342 | 21877 | 6 | - | C | 1 | - | ZZ |
2887497-1 | 49956 | 6 | - | C | 1 | - | ZZ |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
P | A | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
34580 | - | W | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5985-00-116-6600?
When the NSN 5985-00-116-6600 was assigned to the Federal Catalog?
Does the NSN 5985-00-116-6600 contain any precious metals?
Does the NSN 5985-00-116-6600 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.