Variable Attenuator
885C951P1
(NSN) National Stock Number
5985-00-433-9588
Federal Supply Classification
5985 Antennas, Waveguides and Related Equipment
Item Name Code
00838
Schedule B Code
8529109000
Summary
Transmission line application design, coaxial type body style, 8.969 inches nominal overall length, 2.031 inches nominal overall height, 1.781 inches nominal overall width, 0.164 inches nominal unthreaded mounting hole diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00838 | A223A0 | - | 1 |
Specifications
Application Design
transmission line
Details
The primary application for which the item is designed.Body Style
coaxial type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Overall Length
8.969 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
2.031 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.781 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Unthreaded Mounting Hole Diameter
0.164 inches nominal
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Coaxial Connector Series Designation
bnc
Details
A letter or group of letters used to designate the particular coaxial connector series.Overall Attenuation Range In Decibels
+0.0 to 82.5
Details
The overall limits of decrease of the amplitude ratio of a signal between the input and output of the item,expressed in decibels.Attenuation Variation Method
stepped
Details
The means by which the attenuation can be varied from the minimum to the maximum setting.Step Position Quantity
9
Details
The number of intervals at which the item can be set.Attenuation Per Step In Decibels
0.5 and 1.0 and 2.0 and 3.0 and 6.0 and 10.0 and 20.0
Details
The amount of attenuation between adjacent steps,expressed in decibels.Mounting Facility Type And Quantity
4 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Frequency Range
0.000 megahertz minimum and 250.000 megahertz maximum
Details
The minimum and maximum cyclic changes,per unit of time,for which an item is rated.Overall Attenuation Accuracy In Decibels
-2.00 to 2.00
Details
The overall limits of permissible variation in the attenuation accuracy from the nominal value at a specified frequency rating or range,expressed in decibels.Adjustment Device Type And Quantity
5 knob
Details
Indicates the type and number of facilities for adjusting the item.Impedance Rating In Ohms
75.0 input-output
Details
The total opposition (resistive and reactive) to the flow of alternating current,expressed in ohms.Terminal Type And Quantity
2 connector, coaxial, female
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| TG-9075 | 04423 | 5 | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS
CAGE: 99971
SYRACUSE
, NY
, 13221-4840
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5985-00-433-9588
What is the NIIN of the NSN 5985-00-433-9588?
The National Item Identification Number (NIIN) of the NSN 5985-00-433-9588 is 00-433-9588
When the NSN 5985-00-433-9588 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Wed, Aug 19, 1970
Does the NSN 5985-00-433-9588 contain any precious metals?
Type/content is unknown
Does the NSN 5985-00-433-9588 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products