Variable Attenuator
228020-1
Transmission line application design, 1.250 inches nominal center to center distance between mounting facilities parallel to length, 1.250 inches nominal center to center distance between mounting facilities parallel to width, linear scale linearity, 0.188 inches nominal unthreaded mounting hole diameter, 1.20 and 1.35 voltage standing wave ratio
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also resistor, vaiable (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00838 | A223A0 | - | 1 |
Details
The primary application for which the item is designed.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.Details
Equal or unequal distances between graduations representing values of measurement on a scale.Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Details
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.Details
The mathematical relationship of power available at the load before and after addition of the item to the circuit,set to its lowest value of attenuation,expressed in maximum decibels.Details
The overall limits of decrease of the amplitude ratio of a signal between the input and output of the item,expressed in decibels.Details
The means by which the attenuation can be varied from the minimum to the maximum setting.Details
The number of intervals at which the item can be set.Details
The amount of attenuation between adjacent steps,expressed in decibels.Details
Indicates the type and number of facilities by which the item is mounted.Details
The minimum and maximum cyclic changes,per unit of time,for which an item is rated.Details
Indicates the type and number of facilities for adjusting the item.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| TAB50X5 | 04423 | 5 | - | 3 | 2 | - | KE |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | W |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5985-00-811-0095?
When the NSN 5985-00-811-0095 was assigned to the Federal Catalog?
Does the NSN 5985-00-811-0095 contain any precious metals?
Does the NSN 5985-00-811-0095 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.