Power Transformer
651-1053-000
Not established reliability indicator, 4.800 inches nominal 1st mounting facility 1st center group center to center distance between mounting facilities parallel to length, 7.500 inches nominal 2nd mounting facility 2nd center group center to center distance between mounting facilities parallel to length, 4.200 inches nominal 1st mounting facility 1st center group center to center distance between mounting facilities parallel to width, 1.500 inches nominal 2nd mounting facility 2nd center group center to center distance between mounting facilities parallel to width, 400.0 hertz nominal single component frequency rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 32496 | A058B0 | 1 | 2 |
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.Details
The number of complete cyclic changes,per unit of time,for which an item is rated.Details
The relationship of the phase input to the phase output of an alternating current.Details
Indicates the type of connecting windings in a transformer to be powered by two or three phase currents.Details
A measurement of the longest dimension of the body,in distinction from width.Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Details
A measurement from the bottom to the top of the body,in distinction from depth.Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Details
The number of mounting facilities provided.Details
The number of mounting facilities provided.Details
The means of attaching the item.Details
The purpose and the total number of individual (not electrically connected) windings designed to perform in a transformer.Details
A designation that is used for the purpose of general identification of the thread.Details
The value/s/ of the operating voltage applied to the winding.Details
The value/s/ of the operating voltage applied to the winding.Details
The value/s/ of the operating voltage applied to the winding.Details
The value/s/ of the operating voltage applied to the winding.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Details
Indicates the type and number of terminals for providing electrical connection.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5950PL0803544 | 9009H | 9 | - | 6 | 9 | - | WP |
| 5043-418 | 05869 | 5 | - | 5 | 2 | - | TX |
| 651-1053-000N | 97953 | A | - | 3 | 2 | - | TX |
| PEI 9461 | 13483 | 5 | - | 5 | 2 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35355 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 595 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5950-00-005-8993?
When the NSN 5950-00-005-8993 was assigned to the Federal Catalog?
Does the NSN 5950-00-005-8993 contain any precious metals?
Does the NSN 5950-00-005-8993 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.