Receptacle Dummy Connector
10198680
(NSN) National Stock Number
5935-00-133-5377
Federal Supply Classification
5935 Electrical Connectors
Item Name Code
15092
Schedule B Code
8548900100
Summary
0.650 inches nominal overall length, 1.453 inches nominal overall height, 1.453 inches nominal overall width, moisture resistant and salt water resistant and vibration resistant environmental protection, 0.120 inches nominal unthreaded mounting hole diameter, 1.156 inches nominal center to center distance between mounting facilities parallel to height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 9 | - | - | 6 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | WF |
Identification
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15092 | A039B0 | - | 1 |
Specifications
Overall Length
0.650 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Overall Height
1.453 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.453 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Environmental Protection
moisture resistant and salt water resistant and vibration resistant
Details
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.Unthreaded Mounting Hole Diameter
0.120 inches nominal
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Center To Center Distance Between Mounting Facilities Parallel To Height
1.156 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.156 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Distance From Mounting Shoulder To Front Face
0.390 inches nominal
Details
None.Mating End Quantity
1
Details
The number of mating ends provided with the item which are designed to accommodate another connector.Shell Type
solid
Details
Indicates the type of shell included on the item.Connector Locking Method
bayonet pin
Details
The means used to secure a connector to its mating counterpart.Shell Material
aluminum alloy
Details
The chemical compound or mechanical mixture properties of which the shell is fabricated.Shell Surface Treatment
cadmium
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.Shell Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.Test Data Document
81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
96906-ms3115 government standard
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 10-263999-203 | D9853 | 3 | - | 5 | 2 | - | ZG |
| 8500-23 | D9422 | 3 | - | 5 | 2 | - | ZG |
| KPT15-20A | D1371 | 3 | - | 5 | 2 | - | ZG |
| MIL-C-26482 | 81349 | 3 | - | 4 | 1 | - | TX |
| MS3115-20A | 96906 | 3 | - | 2 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34570 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5935-00-133-5377
What is the NIIN of the NSN 5935-00-133-5377?
The National Item Identification Number (NIIN) of the NSN 5935-00-133-5377 is 00-133-5377
When the NSN 5935-00-133-5377 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Thu, Dec 26, 1968
Does the NSN 5935-00-133-5377 contain any precious metals?
Type/content is unknown
Does the NSN 5935-00-133-5377 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products