Motor-Tachometer Generator

U-216569

(NSN) National Stock Number

6105-00-006-9764

Federal Supply Classification

6105 Electrical Motors

Item Name Code

28454

Schedule B Code

8412809000

Summary

5.531 inches overall length, 1.437 inches overall width, 0.156 inches nominal single end spline minor diameter, 15 single end spline quantity, 0.176 inches minimum and 0.177 inches maximum single end shaft diameter, ac input current type

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
1	-	-	CX

Identification

An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.

INC	FIIG	Concept	Condition
28454	A271A0	-	1

Specifications

Overall Length

5.531 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

1.437 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Spline Minor Diameter

0.156 inches nominal single end

Details

The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.

Spline Quantity

15 single end

Details

The number of splines on or in the item.

Shaft Diameter

0.176 inches minimum and 0.177 inches maximum single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Spline Length

0.396 inches minimum and 0.403 inches maximum single end

Details

A measurement of the longest dimension of a spline,in distinction from width.

Mounting Method

clamp ring

Details

The means of attaching the item.

Mounting Facility Type And Quantity

1 clamp collar

Details

Indicates the type and number of facilities by which the item is mounted.

Excitor Type

separately excited

Details

Indicates the type of excitor provided.

Calibration Speed In Rpm

1000.0

Details

The speed at which the calibration is determined,expressed in revolutions per minute.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Calibration Voltage Output Type In Volts

2.75 ac and 3.10 ac

Details

An indication of the type of calibration voltage output,expressed in volts.

Torque Rating And Type

1.25 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

57.5 ac and 115.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

vertical mounting position and horizontal mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Power Rating

12.200 watts input

Details

The amount of electrical energy that can be dissipated.

Length Of Shaft From Housing

0.399 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

40.0 ambient deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

4500.0 single no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.110 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a14 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

two input

Details

The number of alternating current phases.

Frequency In Hertz

400.0 output

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

16 screw and 16 solderless lug

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
1569266	53711	1	-	3	2	-	ZZ
1569266	10001	1	-	3	9	-	CX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

TRANSICOIL LLC DBA ADS TRANSICOIL DIV TRANSICOIL

CAGE: 82686

COLLEGEVILLE , PA , 19426-2042

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-006-9764

What is the NIIN of the NSN 6105-00-006-9764?

The National Item Identification Number (NIIN) of the NSN 6105-00-006-9764 is 00-006-9764

When the NSN 6105-00-006-9764 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Jun 30, 1972

Does the NSN 6105-00-006-9764 contain any precious metals?

Type/content is unknown

Does the NSN 6105-00-006-9764 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.