Control Motor

S11060

(NSN) National Stock Number

6105-00-015-3509

Federal Supply Classification

6105 Electrical Motors

Item Name Code

19258

Schedule B Code

8412809000

Summary

1.062 inches overall height, 1.437 inches overall length, 1.062 inches overall width, 0.125 inches minimum single end and 0.126 inches maximum single end shaft diameter, ac input current type, 13 single end teeth quantity

DAC	HCC	DMIL	RNCC
A	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	CX

Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC	FIIG	Concept	Condition
19258	A271A0	1	1

Specifications

Overall Height

1.062 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

1.437 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

1.062 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Shaft Diameter

0.125 inches minimum single end and 0.126 inches maximum single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Teeth Quantity

13 single end

Details

The number of teeth included on the item.

Maximum Operating Altitude Rating

10000.0 feet

Details

The maximum altitude at which the item is rated to function.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Mounting Method

clamp ring

Details

The means of attaching the item.

Mounting Facility Type And Quantity

1 clamp collar

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Control Field Current Rating In Amps

0.415 and 0.204

Details

The current rating of the control field,expressed in amperes.

Control Field Impedance Rating In Ohms

48.0 and 191.0

Details

The impedance rating of the control field,expressed in ohms.

Control Field Winding Type

two windings, series connected or two windings, parallel connected

Details

Indicates the type of winding(s) of the control field.

Full Tooth Length

0.3130 inches nominal single end

Details

None.

Current Rating Method

no load

Details

The means by which the current is rated.

Torque Rating And Type

0.7 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

18.0 ac and 36.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Length Of Shaft From Housing

0.313 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-54.0 operating deg celsius and 170.0 operating deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

6500.0 low no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.057 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a17 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

two input

Details

The number of alternating current phases.

Frequency In Hertz

400.0 input

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

6 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
229-1030-020	13499	1	-	5	9	-	SE
115-009	19710	5	-	5	9	-	SE
2392-115-009	19710	A	-	5	9	-	CX
S11060	19333	5	-	5	9	-	SE
CR00132-670	88818	5	-	5	9	-	SE
U-211821	82686	A	-	3	2	-	CX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

SL MONTEVIDEO TECHNOLOGY, INC. DBA SL-MTI

CAGE: 54572

PLEASANT PRAIRIE , WI , 53158-5820

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-015-3509

What is the NIIN of the NSN 6105-00-015-3509?

The National Item Identification Number (NIIN) of the NSN 6105-00-015-3509 is 00-015-3509

When the NSN 6105-00-015-3509 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Tue, Apr 25, 1967

Does the NSN 6105-00-015-3509 contain any precious metals?

Type/content is unknown

Does the NSN 6105-00-015-3509 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.