Control Motor

FPF85-61-1

FPF85-61-1
(NSN) National Stock Number
6105-00-019-0841
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary

5.063 inches overall height, 12.406 inches overall length, 5.001 inches overall width, 11 single end spline quantity, 0.369 inches minimum single end and 0.370 inches maximum single end shaft diameter, ac input current type

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
2 - - CX
Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC FIIG Concept Condition
19258 A271A0 1 1
Specifications
Overall Height
5.063 inches
Details The distance measured in a straight line from the bottom to the top of an item.
Overall Length
12.406 inches
Details A measurement of the longest dimension of an item,in distinction from width.
Overall Width
5.001 inches
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Spline Quantity
11 single end
Details The number of splines on or in the item.
Shaft Diameter
0.369 inches minimum single end and 0.370 inches maximum single end
Details The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
Current Type
ac input
Details Indicates the type of current whether alternating,direct,or both.
Enclosure Feature
totally inclosed
Details An indication of the feature/s/ of the enclosure.
Spline Length
0.6300 inches nominal single end
Details A measurement of the longest dimension of a spline,in distinction from width.
Mounting Method
flange
Details The means of attaching the item.
Mounting Facility Type And Quantity
4 unthreaded hole
Details Indicates the type and number of facilities by which the item is mounted.
Cooling Method
natural convection ventilated
Details The means of cooling used to maintain the required operating temperature of the item.
Control Field Impedance Rating In Ohms
43.0
Details The impedance rating of the control field,expressed in ohms.
Control Field Winding Type
two windings, parallel connected
Details Indicates the type of winding(s) of the control field.
Inclosure Specification
commercial
Details The government or industrial specification or standard that defines the inclosure feature.
Control Field Voltage Type And Rating In Volts
115.0 ac
Details Indicates the type of control field voltage and its rating,expressed in volts.
Features Provided
vertical mounting position
Details Those features,not otherwise specified,which may be required for proper functioning of the item.
Length Of Shaft From Housing
0.630 inches single end
Details A measurement of the longest dimension of the shaft projection of an item,in distinction from width.
Temp Rating
-55.0 operating deg celsius and 55.0 operating deg celsius
Details The temperature at which the item is designed to operate.
Mounting Facility Circle Diameter
5.001 inches
Details The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.
Rotor Speed Rating In Rpm
3500.0 single no load
Details The speed rating of a rotor,expressed in revolutions per minute.
Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.
Shaft End Characteristic
a14 single style single end
Details An indication of the characteristic(s) of the shaft end.
Phase
single input
Details The number of alternating current phases.
Frequency In Hertz
60.0 input
Details The cycles per second /hertz/ of the alternating current.
Terminal Type And Quantity
11 screw
Details Indicates the type and number of terminals for providing electrical connection.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
FPF85-61-1 05088 5 - 5 2 - ZZ
C899-5-11 82005 6 - 3 2 - AX
85-61-1 88818 6 - 5 2 - AX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34760 - W -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION
CAGE: 88818
PINE BROOK , NJ , 07058-9385
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-019-0841
What is the NIIN of the NSN 6105-00-019-0841?
The National Item Identification Number (NIIN) of the NSN 6105-00-019-0841 is 00-019-0841
When the NSN 6105-00-019-0841 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 6105-00-019-0841 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-019-0841 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA