Control Motor

08SM1019

(NSN) National Stock Number
6105-00-045-7930
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary

0.750 inches overall height, 1.375 inches overall length, 0.750 inches overall width, 0.1242 inches minimum single end and 0.1247 inches maximum single end shaft diameter, ac input current type, 13 single end teeth quantity

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
2 - - CX
Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC FIIG Concept Condition
19258 A271A0 1 1
Specifications
Overall Height
0.750 inches
Details The distance measured in a straight line from the bottom to the top of an item.
Overall Length
1.375 inches
Details A measurement of the longest dimension of an item,in distinction from width.
Overall Width
0.750 inches
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Shaft Diameter
0.1242 inches minimum single end and 0.1247 inches maximum single end
Details The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
Current Type
ac input
Details Indicates the type of current whether alternating,direct,or both.
Teeth Quantity
13 single end
Details The number of teeth included on the item.
Enclosure Feature
totally inclosed
Details An indication of the feature/s/ of the enclosure.
Mounting Method
clamp ring
Details The means of attaching the item.
Mounting Facility Type And Quantity
1 clamp collar
Details Indicates the type and number of facilities by which the item is mounted.
Cooling Method
nonventilated
Details The means of cooling used to maintain the required operating temperature of the item.
Control Field Current Rating In Amps
0.110
Details The current rating of the control field,expressed in amperes.
Control Field Winding Type
two windings, series connected
Details Indicates the type of winding(s) of the control field.
Full Tooth Length
0.300 inches minimum single end
Details None.
Current Rating Method
no load
Details The means by which the current is rated.
Torque Rating And Type
0.24 inch-ounces stalled
Details Indicates the torque rating,and its type.
Inclosure Specification
commercial
Details The government or industrial specification or standard that defines the inclosure feature.
Control Field Voltage Type And Rating In Volts
26.0 ac
Details Indicates the type of control field voltage and its rating,expressed in volts.
Features Provided
horizontal mounting position and vertical mounting position
Details Those features,not otherwise specified,which may be required for proper functioning of the item.
Length Of Shaft From Housing
0.410 inches single end
Details A measurement of the longest dimension of the shaft projection of an item,in distinction from width.
Temp Rating
-55.0 operating deg celsius and 125.0 operating deg celsius
Details The temperature at which the item is designed to operate.
Rotor Speed Rating In Rpm
6200.0 single no load
Details The speed rating of a rotor,expressed in revolutions per minute.
Current Rating In Amps
0.110 single input
Details The amount of current for which an item is rated,expressed in amperes.
Connection Type And Voltage Rating In Volts
26.0 line to neutral single input
Details Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.
Shaft End Characteristic
a17 single style single end
Details An indication of the characteristic(s) of the shaft end.
Phase
two input
Details The number of alternating current phases.
Frequency In Hertz
400.0 input
Details The cycles per second /hertz/ of the alternating current.
Terminal Type And Quantity
4 wire lead
Details Indicates the type and number of terminals for providing electrical connection.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
5480590P42 97424 5 - 7 2 - CX
8-65-132 67245 5 - 3 2 - ZZ
AMH-8-F-1A 99932 1 - 5 9 - CX
AMH8F1 99932 5 - 3 2 - CX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34760 - W -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.
CAGE: 14404
NEW ULM , MN , 56073-1167
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-045-7930
What is the NIIN of the NSN 6105-00-045-7930?
The National Item Identification Number (NIIN) of the NSN 6105-00-045-7930 is 00-045-7930
When the NSN 6105-00-045-7930 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 6105-00-045-7930 contain any precious metals?
Type/content is unknown
Does the NSN 6105-00-045-7930 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA