Motor-Tachometer Generator

8GMG505-A/100-1/95D

(NSN) National Stock Number

6105-00-052-6935

Federal Supply Classification

6105 Electrical Motors

Item Name Code

28454

Schedule B Code

8412809000

Summary

1.063 inches overall height, 2.200 inches overall length, 0.750 inches overall width, 0.124 inches nominal single end shaft diameter, ac input current type, totally inclosed enclosure feature

DAC	HCC	DMIL	RNCC
1	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	CX

Identification

An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.

INC	FIIG	Concept	Condition
28454	A271A0	-	1

Specifications

Overall Height

1.063 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

2.200 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

0.750 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Shaft Diameter

0.124 inches nominal single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Mounting Method

clamp ring

Details

The means of attaching the item.

Mounting Facility Type And Quantity

1 clamp collar

Details

Indicates the type and number of facilities by which the item is mounted.

Excitor Type

separately excited

Details

Indicates the type of excitor provided.

Calibration Speed In Rpm

1000.0

Details

The speed at which the calibration is determined,expressed in revolutions per minute.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Calibration Voltage Output Type In Volts

0.3 ac

Details

An indication of the type of calibration voltage output,expressed in volts.

Torque Rating And Type

0.15 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

33.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

vertical mounting position and horizontal mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Power Rating

2.800 horsepower output

Details

The amount of electrical energy that can be dissipated.

Length Of Shaft From Housing

0.335 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-55.0 operating deg celsius and 125.0 operating deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

58.0 low no load and 77.0 high no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Connection Type And Voltage Rating In Volts

26.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a1 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

two input

Details

The number of alternating current phases.

Frequency In Hertz

400.0 input

Details

The cycles per second /hertz/ of the alternating current.

Terminal Type And Quantity

10 pin

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
08G4KAD2Z0GH97	10112	4	-	5	2	-	CX
CM10336002	05088	5	-	5	2	-	ZZ
CM10336002	88818	X	-	3	2	-	XX
G110-042-002	88818	5	-	5	9	-	TU
G110-042-002	0D0D0	5	-	5	2	-	TU
8GK-Z0G-004	05224	A	-	5	9	-	CX
08MTG0301B	24156	5	-	5	9	-	CX
6404-01	99932	1	-	5	9	-	KE
C45-6404-01	99932	1	-	5	2	-	KE

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

API HAROWE INC DBA API MOTION DIV API MOTION/PMI/API HAROWE

CAGE: 06989

WEST CHESTER , PA , 19382-4978

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-052-6935

What is the NIIN of the NSN 6105-00-052-6935?

The National Item Identification Number (NIIN) of the NSN 6105-00-052-6935 is 00-052-6935

When the NSN 6105-00-052-6935 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 6105-00-052-6935 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-052-6935 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.