Control Motor
10M100C3
(NSN) National Stock Number
6105-00-071-3807
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary
0.950 inches overall height, 1.317 inches overall length, 0.950 inches overall width, 0.109 inches nominal single end spline minor diameter, 13 single end spline quantity, 0.127 inches nominal single end shaft diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SE |
Identification
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19258 | A271A0 | 1 | 1 |
Specifications
Overall Height
0.950 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
1.317 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
0.950 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Spline Minor Diameter
0.109 inches nominal single end
Details
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.Spline Quantity
13 single end
Details
The number of splines on or in the item.Shaft Diameter
0.127 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Spline Length
0.312 inches nominal single end
Details
A measurement of the longest dimension of a spline,in distinction from width.Mounting Method
clamp ring
Details
The means of attaching the item.Mounting Facility Type And Quantity
1 clamp collar
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Control Field Impedance Rating In Ohms
108.0 and 430.0
Details
The impedance rating of the control field,expressed in ohms.Control Field Winding Type
two windings, series connected or two windings, parallel connected
Details
Indicates the type of winding(s) of the control field.Torque Rating And Type
0.27 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
20.0 ac and 40.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.313 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
-55.0 operating deg celsius and 85.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Rotor Speed Rating In Rpm
10000.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a14 single style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
two input
Details
The number of alternating current phases.Frequency In Hertz
400.0 input
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
6 pin
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 900130-42 | 06481 | 1 | - | 5 | 2 | - | SE |
| CL90121003 | 05088 | 5 | - | 5 | 2 | - | ZZ |
| ABH10BF1AA769 | 1K426 | 5 | - | 5 | 9 | - | CX |
| ABH10BF1AA769 | 99932 | 5 | - | 5 | 9 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
API HAROWE INC DBA API MOTION DIV API MOTION/PMI/API HAROWE
CAGE: 06989
WEST CHESTER
, PA
, 19382-4978
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-071-3807
What is the NIIN of the NSN 6105-00-071-3807?
The National Item Identification Number (NIIN) of the NSN 6105-00-071-3807 is 00-071-3807
When the NSN 6105-00-071-3807 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 6105-00-071-3807 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-071-3807 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products