Control Motor
830781
(NSN) National Stock Number
6105-00-084-1580
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary
0.938 inches overall height, 2.190 inches overall length, 0.938 inches overall width, 0.1870 inches nominal single end shaft diameter, ac input current type, general purpose enclosure feature
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KE |
Identification
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19258 | A271A0 | 1 | 1 |
Specifications
Overall Height
0.938 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
2.190 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
0.938 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.1870 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Enclosure Feature
general purpose
Details
An indication of the feature/s/ of the enclosure.Mounting Method
clamp ring
Details
The means of attaching the item.Mounting Facility Type And Quantity
1 clamp collar
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
ambient air
Details
The means of cooling used to maintain the required operating temperature of the item.Control Field Current Rating In Amps
0.044
Details
The current rating of the control field,expressed in amperes.Control Field Winding Type
two windings, parallel connected
Details
Indicates the type of winding(s) of the control field.Current Rating Method
locked rotor
Details
The means by which the current is rated.Torque Rating And Type
0.28 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
60.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.378 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
0.0 operating deg celsius and 55.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Rotor Speed Rating In Rpm
6500.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Current Rating In Amps
0.187 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
37.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a1 single style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
two input
Details
The number of alternating current phases.Frequency In Hertz
400.0 input
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 114-018 | 19710 | 5 | - | 3 | 2 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-084-1580
What is the NIIN of the NSN 6105-00-084-1580?
The National Item Identification Number (NIIN) of the NSN 6105-00-084-1580 is 00-084-1580
When the NSN 6105-00-084-1580 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Wed, Dec 20, 1967
Does the NSN 6105-00-084-1580 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-084-1580 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products