Control Motor

EBM305

(NSN) National Stock Number

6105-00-102-9737

Federal Supply Classification

6105 Electrical Motors

Item Name Code

19258

Schedule B Code

8412809000

Summary

0.746 inches overall height, 0.968 inches overall length, 0.746 inches overall width, 0.1083 inches nominal single end spline minor diameter, 1 single end spline quantity, 0.1237 inches minimum single end and 0.1247 inches maximum single end shaft diameter

DAC	HCC	DMIL	RNCC
1	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	AX

Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC	FIIG	Concept	Condition
19258	A271A0	1	1

Specifications

Overall Height

0.746 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

0.968 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

0.746 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Spline Minor Diameter

0.1083 inches nominal single end

Details

The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.

Spline Quantity

1 single end

Details

The number of splines on or in the item.

Shaft Diameter

0.1237 inches minimum single end and 0.1247 inches maximum single end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Maximum Operating Altitude Rating

100000.0 feet

Details

The maximum altitude at which the item is rated to function.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Mounting Method

clamp ring

Details

The means of attaching the item.

Mounting Facility Type And Quantity

1 clamp collar

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Control Field Current Rating In Amps

0.100

Details

The current rating of the control field,expressed in amperes.

Control Field Impedance Rating In Ohms

470.0

Details

The impedance rating of the control field,expressed in ohms.

Control Field Winding Type

single winding

Details

Indicates the type of winding(s) of the control field.

Current Rating Method

no load

Details

The means by which the current is rated.

Torque Rating And Type

0.27 inch-ounces stalled

Details

Indicates the torque rating,and its type.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

40.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Length Of Shaft From Housing

0.147 inches single end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

50.0 ambient deg celsius and -55.0 operating deg celsius and 125.0 operating deg celsius

Details

The temperature at which the item is designed to operate.

Rotor Speed Rating In Rpm

7500.0 single no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.150 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

26.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a14 single style single end

Details

An indication of the characteristic(s) of the shaft end.

Phase

single input

Details

The number of alternating current phases.

Frequency In Hertz

400.0 input

Details

The cycles per second /hertz/ of the alternating current.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
08M4KAF0E0	10112	5	-	5	2	-	ZZ
08SM572	14404	3	-	3	2	-	AX
08M4KAF0E0	10651	3	-	5	9	-	AX
8M400T7A	06989	3	-	3	2	-	AX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MISSION SYSTEMS DAVENPORT INC. DBA MISSION SYSTEMS AAR

CAGE: 99251

DAVENPORT , IA , 52804-1203

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-102-9737

What is the NIIN of the NSN 6105-00-102-9737?

The National Item Identification Number (NIIN) of the NSN 6105-00-102-9737 is 00-102-9737

When the NSN 6105-00-102-9737 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Wed, Jun 12, 1968

Does the NSN 6105-00-102-9737 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-102-9737 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.