Direct Current Motor
41A711
(NSN) National Stock Number
6105-00-103-6482
Federal Supply Classification
6105 Electrical Motors
Item Name Code
16350
Schedule B Code
-
Summary
0.875 inches overall height, 2.093 inches overall length, 0.875 inches overall width, 0.2500 inches nominal single end shaft diameter, 13 single end teeth quantity, 70000.0 feet maximum operating altitude rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A motor which is designed for operation from a direct current source. Excludes:motor, engine starter, electrical. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16350 | A271A0 | 1 | 1 |
Specifications
Overall Height
0.875 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
2.093 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
0.875 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.2500 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Teeth Quantity
13 single end
Details
The number of teeth included on the item.Maximum Operating Altitude Rating
70000.0 feet
Details
The maximum altitude at which the item is rated to function.Shaft Rotation Direction
clockwise single end or counterclockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
intermittent
Details
The working period under which the item was designed to operate.Enclosure Feature
open protected
Details
An indication of the feature/s/ of the enclosure.Winding Type
permanent magnet
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Mounting Method
face
Details
The means of attaching the item.Mounting Facility Type And Quantity
2 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
ambient air
Details
The means of cooling used to maintain the required operating temperature of the item.Current Rating Method
locked rotor
Details
The means by which the current is rated.Torque Rating And Type
2.0 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.262 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
-55.0 operating deg celsius and 75.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Mounting Facility Circle Diameter
0.660 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
13500.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Current Rating In Amps
1.150 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
27.5 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a17 single style single end
Details
An indication of the characteristic(s) of the shaft end.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-103-6482
What is the NIIN of the NSN 6105-00-103-6482?
The National Item Identification Number (NIIN) of the NSN 6105-00-103-6482 is 00-103-6482
When the NSN 6105-00-103-6482 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Jun 19, 1968
Does the NSN 6105-00-103-6482 contain any precious metals?
Type/content is unknown
Does the NSN 6105-00-103-6482 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.