Motor-Tachometer Generator

700-0015

700-0015
(NSN) National Stock Number
6105-00-156-3747
Federal Supply Classification
6105 Electrical Motors
Item Name Code
28454
Schedule B Code
8412809000
Summary

1.740 inches overall length, 0.937 inches overall width, 0.1237 inches minimum and 0.1247 inches maximum single end shaft diameter, ac input current type, 13 single end teeth quantity, totally inclosed enclosure feature

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
9 - - SE
Identification

An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.

INC FIIG Concept Condition
28454 A271A0 - 1
Specifications
Overall Length
1.740 inches
Details A measurement of the longest dimension of an item,in distinction from width.
Overall Width
0.937 inches
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Shaft Diameter
0.1237 inches minimum and 0.1247 inches maximum single end
Details The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
Current Type
ac input
Details Indicates the type of current whether alternating,direct,or both.
Teeth Quantity
13 single end
Details The number of teeth included on the item.
Enclosure Feature
totally inclosed
Details An indication of the feature/s/ of the enclosure.
Mounting Method
clamp ring
Details The means of attaching the item.
Mounting Facility Type And Quantity
1 clamp collar
Details Indicates the type and number of facilities by which the item is mounted.
Excitor Type
separately excited
Details Indicates the type of excitor provided.
Cooling Method
nonventilated
Details The means of cooling used to maintain the required operating temperature of the item.
Full Tooth Length
0.2750 inches nominal single end
Details None.
Torque Rating And Type
0.3 inch-ounces stalled
Details Indicates the torque rating,and its type.
Inclosure Specification
commercial
Details The government or industrial specification or standard that defines the inclosure feature.
Control Field Voltage Type And Rating In Volts
26.0 ac
Details Indicates the type of control field voltage and its rating,expressed in volts.
Features Provided
vertical mounting position and horizontal mounting position
Details Those features,not otherwise specified,which may be required for proper functioning of the item.
Power Rating
1.140 watts input
Details The amount of electrical energy that can be dissipated.
Length Of Shaft From Housing
0.348 inches single end
Details A measurement of the longest dimension of the shaft projection of an item,in distinction from width.
Temp Rating
-54.0 operating deg celsius and 125.0 operating deg celsius
Details The temperature at which the item is designed to operate.
Rotor Speed Rating In Rpm
7100.0 single no load
Details The speed rating of a rotor,expressed in revolutions per minute.
Connection Type And Voltage Rating In Volts
26.0 line to neutral single input
Details Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.
Shaft End Characteristic
a17 single style single end
Details An indication of the characteristic(s) of the shaft end.
Phase
two input
Details The number of alternating current phases.
Frequency In Hertz
400.0 output
Details The cycles per second /hertz/ of the alternating current.
Terminal Type And Quantity
9 wire lead
Details Indicates the type and number of terminals for providing electrical connection.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
10MT-0325 51761 5 - 5 2 - ZZ
17298-1 89944 2 - 5 9 - 9Z
10MG-110T/100-H-4 06989 4 - 5 9 - 9Z
10MG110T100H4 06989 5 - 3 2 - SE
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34760 - P -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
LINAIR DESIGN CORP
CAGE: 25249
LINDEN , NJ , 07036
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-156-3747
What is the NIIN of the NSN 6105-00-156-3747?
The National Item Identification Number (NIIN) of the NSN 6105-00-156-3747 is 00-156-3747
When the NSN 6105-00-156-3747 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Mon, Jan 26, 1970
Does the NSN 6105-00-156-3747 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-156-3747 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA