Control Motor

591137-2

(NSN) National Stock Number

6105-00-197-8671

Federal Supply Classification

6105 Electrical Motors

Item Name Code

19258

Schedule B Code

8412809000

Summary

3.250 inches overall height, 4.562 inches overall length, 2.375 inches overall width, 0.155 inches nominal first end thread length, 0.158 inches minimum second end and 0.159 inches maximum second end shaft diameter, 0.157 inches minimum first end and 0.158 inches maximum first end shaft diameter

DAC	HCC	DMIL	RNCC
X	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	XX

Identification

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

INC	FIIG	Concept	Condition
19258	A271A0	1	1

Specifications

Overall Height

3.250 inches

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Length

4.562 inches

Details

A measurement of the longest dimension of an item,in distinction from width.

Overall Width

2.375 inches

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Thread Length

0.155 inches nominal first end

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Shaft Diameter

0.158 inches minimum second end and 0.159 inches maximum second end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Diameter

0.157 inches minimum first end and 0.158 inches maximum first end

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Flatted Portion Length

0.7500 inches nominal second end

Details

None.

Current Type

ac input

Details

Indicates the type of current whether alternating,direct,or both.

Flat Depth

0.3750 inches nominal second end

Details

None.

Enclosure Feature

totally inclosed

Details

An indication of the feature/s/ of the enclosure.

Mounting Method

face

Details

The means of attaching the item.

Mounting Facility Type And Quantity

4 unthreaded hole

Details

Indicates the type and number of facilities by which the item is mounted.

Cooling Method

nonventilated

Details

The means of cooling used to maintain the required operating temperature of the item.

Control Field Current Rating In Amps

0.120

Details

The current rating of the control field,expressed in amperes.

Control Field Impedance Rating In Ohms

1000.0

Details

The impedance rating of the control field,expressed in ohms.

Control Field Winding Type

two windings, series connected

Details

Indicates the type of winding(s) of the control field.

Current Rating Method

no load

Details

The means by which the current is rated.

Inclosure Specification

commercial

Details

The government or industrial specification or standard that defines the inclosure feature.

Control Field Voltage Type And Rating In Volts

115.0 ac

Details

Indicates the type of control field voltage and its rating,expressed in volts.

Features Provided

horizontal mounting position and vertical mounting position

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Nominal Thread Size

0.112 inches first end

Details

A designation that is used for the purpose of general identification of the thread.

Length Of Shaft From Housing

0.500 inches first end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Length Of Shaft From Housing

1.375 inches second end

Details

A measurement of the longest dimension of the shaft projection of an item,in distinction from width.

Temp Rating

-20.0 operating deg celsius and 50.0 operating deg celsius

Details

The temperature at which the item is designed to operate.

Mounting Facility Circle Diameter

2.437 inches

Details

The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.

Rotor Speed Rating In Rpm

3500.0 single no load

Details

The speed rating of a rotor,expressed in revolutions per minute.

Current Rating In Amps

0.120 single input

Details

The amount of current for which an item is rated,expressed in amperes.

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

Details

Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.

Shaft End Characteristic

a2 single style first end

Details

An indication of the characteristic(s) of the shaft end.

Shaft End Characteristic

a5 single style second end

Details

An indication of the characteristic(s) of the shaft end.

Phase

two input

Details

The number of alternating current phases.

Frequency In Hertz

60.0 input

Details

The cycles per second /hertz/ of the alternating current.

Thread Series Designator

unf first end

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Terminal Type And Quantity

4 screw

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
8025640	18876	5	-	5	2	-	CX
KA325PC56	04220	X	-	5	2	-	XX
KA416PC50	04220	X	-	5	2	-	XX
KA418PC50	04220	X	-	5	2	-	XX
KA420PC50	04220	X	-	5	2	-	XX
KA430PC53	04220	X	-	5	2	-	XX
KA451PC25	04220	X	-	5	2	-	XX
M7403235-1	88422	X	-	5	2	-	XX
M7403235-1	24446	X	-	5	9	-	XX
M7477343-1	24446	X	-	5	9	-	XX
FPE25-11	05088	5	-	3	2	-	ZZ
FPE25-11	88818	X	-	5	9	-	XX
FPE25-11WGEAR	88818	X	-	5	9	-	XX
W115-5091G3	49956	X	-	5	2	-	XX
211052	80064	X	-	5	2	-	XX
2200-3109388PC53	80064	X	-	5	2	-	XX
2200-3110604PC56	80064	X	-	5	2	-	XX
2200-3110606PC50	80064	X	-	5	2	-	XX
2200-3110608PC50	80064	X	-	5	2	-	XX
2200-3110610PC50	80064	X	-	5	2	-	XX
2200-3113772PC25	80064	X	-	5	2	-	XX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34760	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

CAGE: 10001

WASHINGTON , DC , 20376

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 6105-00-197-8671

What is the NIIN of the NSN 6105-00-197-8671?

The National Item Identification Number (NIIN) of the NSN 6105-00-197-8671 is 00-197-8671

When the NSN 6105-00-197-8671 was assigned to the Federal Catalog?

It was assigned 61 years ago, on Tue, Jan 1, 1963

Does the NSN 6105-00-197-8671 contain any precious metals?

Does not contain precious metal

Does the NSN 6105-00-197-8671 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.