Motor-Tachometer Generator

U-210315

U-210315
(NSN) National Stock Number
6105-00-198-9645
Federal Supply Classification
6105 Electrical Motors
Item Name Code
28454
Schedule B Code
8412809000
Summary

1.437 inches overall height, 4.949 inches overall length, 1.437 inches overall width, 0.187 inches nominal single end shaft diameter, ac input current type, totally inclosed enclosure feature

DAC HCC DMIL RNCC
6 - - 3
RNVC SADC MSDS RNAAC
2 - - CX
Identification

An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes:dynamotor; and motor-generator.

INC FIIG Concept Condition
28454 A271A0 - 1
Specifications
Overall Height
1.437 inches
Details The distance measured in a straight line from the bottom to the top of an item.
Overall Length
4.949 inches
Details A measurement of the longest dimension of an item,in distinction from width.
Overall Width
1.437 inches
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Shaft Diameter
0.187 inches nominal single end
Details The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
Current Type
ac input
Details Indicates the type of current whether alternating,direct,or both.
Enclosure Feature
totally inclosed
Details An indication of the feature/s/ of the enclosure.
Mounting Method
face
Details The means of attaching the item.
Mounting Facility Type And Quantity
4 threaded hole
Details Indicates the type and number of facilities by which the item is mounted.
Excitor Type
separately excited
Details Indicates the type of excitor provided.
Calibration Speed In Rpm
1000.0
Details The speed at which the calibration is determined,expressed in revolutions per minute.
Cooling Method
nonventilated
Details The means of cooling used to maintain the required operating temperature of the item.
Calibration Voltage Output Type In Volts
3.2 ac
Details An indication of the type of calibration voltage output,expressed in volts.
Torque Rating And Type
2.0 inch-ounces stalled
Details Indicates the torque rating,and its type.
Inclosure Specification
commercial
Details The government or industrial specification or standard that defines the inclosure feature.
Control Field Voltage Type And Rating In Volts
36.0 ac
Details Indicates the type of control field voltage and its rating,expressed in volts.
Features Provided
vertical mounting position and horizontal mounting position
Details Those features,not otherwise specified,which may be required for proper functioning of the item.
Criticality Code Justification
feat
Details The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
Length Of Shaft From Housing
0.490 inches single end
Details A measurement of the longest dimension of the shaft projection of an item,in distinction from width.
Mounting Facility Circle Diameter
1.100 inches
Details The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.
Rotor Speed Rating In Rpm
2600.0 low no load and 3200.0 high no load
Details The speed rating of a rotor,expressed in revolutions per minute.
Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.
Shaft End Characteristic
a1 single style single end
Details An indication of the characteristic(s) of the shaft end.
Phase
two input
Details The number of alternating current phases.
Special Features
integral gear head ratio 100 to 1min or 103 to 1 max
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Frequency In Hertz
60.0 output
Details The cycles per second /hertz/ of the alternating current.
Terminal Type And Quantity
10 wire lead
Details Indicates the type and number of terminals for providing electrical connection.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
23-805254-1 07397 1 - 5 9 - HD
15G6L-AC4-C1GH100 10651 6 - 5 9 - CX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34760 - W -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
TRANSICOIL LLC DBA ADS TRANSICOIL DIV TRANSICOIL
CAGE: 82686
COLLEGEVILLE , PA , 19426-2042
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-198-9645
What is the NIIN of the NSN 6105-00-198-9645?
The National Item Identification Number (NIIN) of the NSN 6105-00-198-9645 is 00-198-9645
When the NSN 6105-00-198-9645 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Jan 24, 1969
Does the NSN 6105-00-198-9645 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-198-9645 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2025 Aerospace Shop, Inc. All rights reserved.
Made in USA