Direct Current Motor
41A192
(NSN) National Stock Number
6105-00-226-4632
Federal Supply Classification
6105 Electrical Motors
Item Name Code
16350
Schedule B Code
-
Summary
0.883 inches overall height, 1.844 inches overall length, 0.883 inches overall width, 0.188 inches nominal single end shaft diameter, 18 single end teeth quantity, 12000.0 feet maximum operating altitude rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed for operation from a direct current source. Excludes:motor, engine starter, electrical. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16350 | A271A0 | 1 | 1 |
Specifications
Overall Height
0.883 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
1.844 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
0.883 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.188 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Teeth Quantity
18 single end
Details
The number of teeth included on the item.Maximum Operating Altitude Rating
12000.0 feet
Details
The maximum altitude at which the item is rated to function.Shaft Rotation Direction
counterclockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
intermittent
Details
The working period under which the item was designed to operate.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Winding Type
permanent magnet
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Mounting Method
face
Details
The means of attaching the item.Mounting Facility Type And Quantity
2 threaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Time Interval
5.0 minutes maximum on and 55.0 minutes minimum off
Details
The acceptable time limits for the item.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Current Rating Method
load
Details
The means by which the current is rated.Torque Rating And Type
0.6 inch-ounces running and 2.3 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Features Provided
horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.375 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Temp Rating
-40.0 operating deg celsius and 71.0 operating deg celsius
Details
The temperature at which the item is designed to operate.Mounting Facility Circle Diameter
0.660 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
12000.0 single full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Current Rating In Amps
0.520 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
27.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a17 single style single end
Details
An indication of the characteristic(s) of the shaft end.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SM-D-504042 | 80063 | 1 | - | 3 | 2 | - | CX |
| C41A192 | 25140 | 5 | - | 5 | 9 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-226-4632
What is the NIIN of the NSN 6105-00-226-4632?
The National Item Identification Number (NIIN) of the NSN 6105-00-226-4632 is 00-226-4632
When the NSN 6105-00-226-4632 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 6105-00-226-4632 contain any precious metals?
Type/content is unknown
Does the NSN 6105-00-226-4632 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products